NEMIX RAM
NEMIX RAM MD25600-818K2 16GB (2x8GB) DDR4 3200 CL22 1.2V 288-pin UDIMM memory upgrade
16 GB dual-channel DDR4-3200 kit at CL22 1.2 V for ASUS Prime B760M-K, H610I-PLUS and H610M-E boards
- Capacity16GB (2 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB dual-channel kit boosts multitasking headroom
- DDR4 3200 MT/s speed feeds data to CPU faster
- CL22 latency keeps response tight under load
- 2 V operation reduces power draw and heat
- Validated for ASUS Prime B760M-K D4 and H610 boards
Compatible DDR4 kit for ASUS Prime boards
This 16GB kit contains two 8GB unbuffered UDIMMs rated at DDR4 3200 with CL22 timing at 1.2V. It is built for ASUS Prime B760M-K D4, Prime H610I-PLUS D4-CSM and Prime H610M-E D4 motherboards using major OEM Samsung, Micron or Hynix chips. The modules are non-ECC and carry no heat spreader.
288-pin UDIMM form factor fits standard desktop
Each stick uses the 288-pin DDR4 UDIMM layout with a 1Rx8 rank configuration, so installation follows the usual dual-channel pairing on the supported boards. The low-profile design without a heat spreader avoids clearance issues with larger CPU coolers. Modules are stress-tested under load before shipping.
Check your motherboard model
Verify the exact ASUS Prime model listed above; other chipsets or form factors are not confirmed compatible. Ensure the board has two free DDR4 slots for dual-channel operation and that the BIOS is current enough to recognise 3200MHz JEDEC speeds. Systems requiring ECC or registered memory cannot use this kit.
Highlights
- 16 GB dual-channel kit boosts multitasking headroom
- DDR4 3200 MT/s speed feeds data to CPU faster
- CL22 latency keeps response tight under load
- 2 V operation reduces power draw and heat
- Validated for ASUS Prime B760M-K D4 and H610 boards
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | ASUS Gaming Motherboard Compatible Series Memory |
| Model | ASUS DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | ASUS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Questions about this item
What DDR4 standard and speed does this MD25600-818K2 kit run at?
The kit runs at DDR4 3200, rated PC4-25600, with CL22 timings at 1.20 V.
What physical slot and clearance does this 288-pin UDIMM need?
It needs a standard 288-pin DDR4 UDIMM slot; the modules have no heat spreader, so they fit under most CPU coolers.
How do I install the two 8 GB modules, and what step is often missed?
Insert each module until the side clips click; the step often missed is seating both ends evenly so the clips engage together.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



