NEMIX RAM
NEMIX RAM MD25600-818K2 16GB (2x8GB) DDR4 3200 CL22 1.2V 288-pin UDIMM for MSI MAG B550 Tomahawk MAX WiFi
16 GB dual-channel DDR4 kit at 3200 MHz with CL22 latency and 1.2 V operation for MSI MAG B550 Tomahawk MAX WiFi motherboards
- Capacity16GB (2 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB dual-channel kit boosts multitasking headroom
- DDR4 3200 MT/s CL22 delivers responsive throughput
- 2 V operation keeps power draw low
- 288-pin UDIMM fits standard desktop slots
- Validated for MSI MAG B550 Tomahawk MAX WiFi
System-Specific DDR4 Memory Kit
This NEMIX RAM 16GB kit contains two 8GB DDR4 3200 UDIMM modules validated for the MSI MAG B550 Tomahawk MAX WiFi motherboard. The kit delivers 16GB total capacity at PC4-25600 speed with CL22 latency and 1.20V operation. Unbuffered non-ECC design ensures straightforward desktop installation.
For MSI B550 Tomahawk MAX WiFi builders only
This memory suits builders upgrading or repairing that exact motherboard model who need guaranteed compatibility. Buyers with different motherboards, laptops, or servers should look elsewhere because this kit is qualified for one specific platform. Systems requiring ECC, registered modules, or DDR5 memory cannot use this product.
16GB dual-channel capacity decides fit
The 16GB (2x8GB) capacity determines whether this kit matches your planned memory configuration. If your workload needs more than 16GB or a different module count, this kit will not meet that requirement. The 1Rx8 rank structure and 288-pin DDR4 form factor are fixed by the validated specification.
Highlights
- 16 GB dual-channel kit boosts multitasking headroom
- DDR4 3200 MT/s CL22 delivers responsive throughput
- 2 V operation keeps power draw low
- 288-pin UDIMM fits standard desktop slots
- Validated for MSI MAG B550 Tomahawk MAX WiFi
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | MSI Gaming Motherboard Compatible Series Memory |
| Model | MSI DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | MSI |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Questions about this item
Will the 288-pin DDR4 UDIMM modules fit the four DIMM slots on the MSI MAG B550 Tomahawk MAX WiFi motherboard?
Yes, the kit uses standard 288-pin DDR4 UDIMM form factor which matches the four DDR4 slots on that board.
Do I need to enable XMP in the BIOS to reach 3200 MT/s, or will it run at that speed automatically?
The modules are rated CL22 at 3200 MT/s; enable the XMP profile in BIOS to run at the rated speed instead of the default JEDEC frequency.
Since there is no heat spreader, will the Samsung, Micron or Hynix chips need active airflow to stay cool under load?
Bare DDR4 chips at 1.2 V typically run cool enough with normal case airflow; add a case fan near the DIMM area only if temperatures exceed specification.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



