NEMIX RAM DDR5 5600 64GB (4x16GB) CL46 1Rx8 ECC RDIMM Supermicro H14SSL-NT
- 64GB (4 x 16GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
A 64 GB DDR5 ECC RDIMM kit of four 16 GB modules running at 4800 MHz CL40 1.1 V, registered for full-capacity stability on the Supermicro H13SST-G motherboard
Size 64GB 4X16GB
This 64GB kit contains four 16GB DDR5 4800 RDIMMs rated at CL40 and 1.10V. Registered ECC architecture with 1Rx8 organisation matches the Supermicro H13SST-G memory controller for full-capacity recognition at rated speed.
This kit suits administrators upgrading a Supermicro H13SST-G with validated registered ECC modules. Builders requiring UDIMM, SODIMM or non-ECC memory should look elsewhere, as the board demands 288-pin RDIMMs.
Install by following the motherboard manual for approved population order and capacity limits. Common issues arise when slots are filled out of sequence or when mixed-rank modules prevent the system from posting at full speed.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB 4X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The kit uses 288-pin DDR5 RDIMM modules, so the board needs DDR5 RDIMM slots — standard for the H13SST-G — and the memory controller must support registered ECC operation.
The motherboard will clock all populated slots to the lowest common speed and timing; mixing ranks or latencies may force a lower frequency than 4800 MHz.
Check the BIOS memory summary or OS tools such as dmidecode for 64 GB total, 4800 MT/s data rate, CL40 latency, and ECC status reported as enabled.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?