We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 ECC UDIMM sticks, no heat spreaders, 288-pin gold contacts visible

NEMIX RAM

NEMIX RAM DDR5 5600MHz 32GB (2x16GB) ECC UDIMM CL46 1.1V 288-pin memory upgrade

SKU CH-QM3N-65PES

A 32GB dual-channel DDR5 ECC UDIMM kit running at 5600MHz with CL46 latency and 1.1V operation, validated for the Supermicro X13SAW-TLN4F motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

  • Error-correcting ECC prevents silent data corruption
  • DDR5 5600 speed with CL46 latency runs at rated performance
  • 32 GB dual-channel kit (2 × 16 GB) maximises motherboard capacity
  • 1 V unbuffered UDIMM matches exact voltage and form factor
  • Verified compatibility with Supermicro X13SAW-TLN4F motherboard

System-specific DDR5 ECC kit

This 32GB kit contains two 16GB DDR5 5600 unbuffered ECC UDIMMs built to the exact rank, voltage and timing the Supermicro X13SAW-TLN4F memory controller expects. It installs as a matched pair so the board recognises the full capacity at its rated speed.

Verified fitment for one motherboard

The modules are confirmed compatible with the Supermicro X13SAW-TLN4F and its DDR5 5600 ECC requirements. The 288-pin UDIMM form factor matches the board's slots, and the 1Rx8 organisation follows the population rules the manual specifies.

1Rx8 unbuffered ECC at 1.1V

The single-rank 1Rx8 layout running at 1.1V is the specification that decides whether this kit works in your system; boards that need registered DIMMs, different ranks or another voltage will not accept it. Builders who need RDIMMs, SODIMMs or non-ECC memory must choose a different kit.

Highlights

  • Error-correcting ECC prevents silent data corruption
  • DDR5 5600 speed with CL46 latency runs at rated performance
  • 32 GB dual-channel kit (2 × 16 GB) maximises motherboard capacity
  • 1 V unbuffered UDIMM matches exact voltage and form factor
  • Verified compatibility with Supermicro X13SAW-TLN4F motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 1Rx8 DDR5 modules need replacement after a certain number of write cycles?

The 1Rx8 DDR5 ECC UDIMM modules have no write-cycle limit; they are solid-state DRAM and only require replacement if a hardware fault occurs.

What is the first limit reached when the 32GB DDR5 5600 kit runs sustained workloads?

The CL46 latency at 5600MHz is the primary timing constraint; bandwidth and capacity remain fixed at 32GB and PC5-44800.

How much heat and power does the 1.1V DDR5 ECC kit produce during all-day operation?

At 1.1V the two 16GB UDIMMs draw minimal power and run without a heat spreader, so temperatures stay low in typical server chassis airflow.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.