We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules in a row, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600 192GB 4x48GB CL46 1.1V ECC RDIMM Supermicro H14DSG-OM memory upgrade

SKU CH-30QD-RXMA4

192 GB DDR5 ECC RDIMM kit runs at 5600 MHz with CL46 latency and 1.1 V for the Supermicro H14DSG-OM motherboard

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 4X48GB

Show 30 more configurations
  • 192 GB total capacity from four 48 GB modules
  • DDR5-5600 speed with CL46 latency for rated throughput
  • Registered ECC architecture corrects single-bit errors automatically
  • 1 V operation matches the board's memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OM motherboard

Exact DDR5-5600 kit for Supermicro H14DSG-OM

This 192GB kit contains four 48GB DDR5 5600 RDIMM modules built to the precise rank, voltage and timing the H14DSG-OM memory controller expects. It is intended for administrators upgrading that specific motherboard to its maximum supported capacity with registered ECC memory.

Registered ECC RDIMM with 2Rx8 organisation

Each module is a 288-pin DDR5 RDIMM operating at 1.1V with CL46 latency and a 2Rx8 layout. The registered buffer and on-die ECC let the board run all slots fully populated at the rated 5600 MT/s while correcting single-bit errors before they affect workloads.

Populates four DIMM slots on the target board

The kit fills four DDR5 RDIMM slots on the Supermicro H14DSG-OM, leaving no empty slots in a four-channel configuration. It is not suitable for systems that require UDIMM or SODIMM form factors, or for boards that do not support registered ECC DDR5 at this density.

Highlights

  • 192 GB total capacity from four 48 GB modules
  • DDR5-5600 speed with CL46 latency for rated throughput
  • Registered ECC architecture corrects single-bit errors automatically
  • 1 V operation matches the board's memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OM motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the DDR5-5600 rating run at that speed once installed in a Supermicro H14DSG-OM?

Yes, the kit is spec-matched to the board's memory controller so it is recognized at full capacity and operates at its rated 5600 MT/s with CL46 timing.

What does the registered ECC design do for a fully populated server?

Registered buffering offloads the memory controller allowing all four slots to run at 48 GB each, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

What physical slot and pin count does this kit require?

It uses the 288-pin DDR5 RDIMM form factor required by the H14DSG-OM; it will not fit UDIMM or SODIMM sockets.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.