We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green circuit boards with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 4800 128GB (4x32GB) ECC RDIMM CL40 1.1V 2Rx8 Supermicro H14DSG-OD memory upgrade

SKU CH-2XA5-PA83R

A 128GB DDR5 ECC RDIMM kit with four 32GB modules running at 4800MHz CL40 1.1V, registered for full-capacity stability on Supermicro H14DSG-OD

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

Show 30 more configurations
  • 128 GB total capacity from four 32 GB modules
  • DDR5 4800 MT/s speed with CL40 latency
  • Registered ECC architecture corrects single-bit errors automatically
  • 1 V operating voltage matches server memory controller spec
  • Verified fit for Supermicro H14DSG-OD motherboard 288-pin RDIMM slots

Exact DDR5 4800 ECC RDIMM kit for Supermicro

This 128 GB kit contains four 32 GB registered DDR5 modules rated at 4800 MT/s with CL40 latency and 1.1 V operation. It is built for the Supermicro H14DSG-OD motherboard where registered ECC memory is required for full-capacity stability.

Installing registered ECC RDIMMs

Modules are 288-pin RDIMMs that seat only in DDR5 RDIMM slots; they will not fit UDIMM or SODIMM sockets. Follow the motherboard manual population sequence exactly — wrong slot order prevents the system from recognising the full 128 GB.

Before ordering verify your platform

Confirm the board is a Supermicro H14DSG-OD and that its firmware supports 128 GB of registered ECC DDR5 at 4800 MT/s. Check the manual for approved DIMM population rules and any BIOS version requirements before purchase.

Highlights

  • 128 GB total capacity from four 32 GB modules
  • DDR5 4800 MT/s speed with CL40 latency
  • Registered ECC architecture corrects single-bit errors automatically
  • 1 V operating voltage matches server memory controller spec
  • Verified fit for Supermicro H14DSG-OD motherboard 288-pin RDIMM slots

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How can I confirm the kit is running at DDR5 4800 with CL40 after installation?

Enter the BIOS or use a tool such as dmidecode to verify each module reports 4800 MT/s, CL40 timings, 1.10 V and 2Rx8 registered ECC operation.

What does the package contain and are any extra parts required?

The box holds four 32 GB DDR5 288-pin RDIMMs for a total of 128 GB; no additional components are needed for the Supermicro H14DSG-OD.

Which capacity kit should I choose for the H14DSG-OD?

Select the 128 GB (4 x 32 GB) kit to match the board's validated population rules and achieve full-channel bandwidth.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.