We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM DDR5 32GB (2x16GB) 5600MHz CL46 1.1V 288-Pin UDIMM Dell Pro Max Tower T2

SKU CH-AGVE-983F1

32 GB dual-channel DDR5 kit at 5600 MHz with CL46 timing and 1.1 V operation for Dell Pro Max Tower T2

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB dual-channel kit doubles memory bandwidth for Dell Pro Max Tower T2
  • DDR5 5600 MT/s speed raises data throughput for demanding workloads
  • Low 1.10 V operation reduces power draw and heat output
  • CL46 latency keeps response times tight during multitasking
  • 288-pin UDIMM form factor fits straight into the desktop memory slots

Dell Pro Max Tower T2 memory kit

This 32 GB kit contains two 16 GB DDR5 UDIMM modules built for the Dell Pro Max Tower T2 desktop. Each module runs at 5600 MHz with a CL46 latency at 1.1 V. The unbuffered non-ECC design suits standard desktop workloads.

Verify DDR5 UDIMM support

Confirm the motherboard accepts 288-pin DDR5 UDIMM memory and can operate at the 5600 MHz data rate. Check that the system BIOS recognises 1Rx8 modules at 1.1 V without requiring registered or ECC memory.

Two-slot population

The dual-module kit fills two DIMM slots, leaving any remaining slots free for future expansion. No heat spreader is fitted, so clearance around adjacent components is maximised. Installation follows the standard UDIMM insertion procedure.

Highlights

  • 32 GB dual-channel kit doubles memory bandwidth for Dell Pro Max Tower T2
  • DDR5 5600 MT/s speed raises data throughput for demanding workloads
  • Low 1.10 V operation reduces power draw and heat output
  • CL46 latency keeps response times tight during multitasking
  • 288-pin UDIMM form factor fits straight into the desktop memory slots

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (2 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Questions about this item

Does the kit contain two 16 GB modules or do I need to buy a second stick separately?

The kit includes two 16 GB DDR5 UDIMM modules for a total of 32 GB, so no additional sticks are required.

Should I choose the CL46 5600 MHz version or look for a lower-latency alternative?

This kit is specified at CL46 and 5600 MHz; select it when your Dell Pro Max Tower T2 calls for those exact timings.

What does the 5600 MHz rating mean once the memory is installed in the Dell Pro Max Tower T2?

The modules will run at 5600 MHz DDR5 speed with CL46 latency at 1.10 V, matching the system's supported memory profile.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.