NEMIX RAM
NEMIX RAM 96GB (2x48GB) DDR5 4800 CL40 262-Pin SODIMM for ASRock IMB-X1244-WV memory upgrade
A 96 GB DDR5 SODIMM kit with two 48 GB modules running at 4800 MHz CL40 1.1 V for the ASRock IMB-X1244-WV motherboard
- Capacity96GB (2 x 48GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 96GB total capacity for demanding workloads using two 48GB modules
- DDR5 4800 speed transfers data at PC5-38400 bandwidth
- CL40 CAS latency supports responsive system operation
- 1V low voltage reduces power draw and heat
- 262-pin SODIMM form factor fits ASRock IMB-X1244-WV motherboard
NEMIX RAM 96GB DDR5 SODIMM Kit
This 96GB kit contains two 48GB DDR5 4800 SODIMM modules rated at CL40 and 1.1V. It is built for the ASRock Industrial IMB-X1244-WV Mini-ITX motherboard and suits integrators who need high-capacity, non-ECC memory for embedded or industrial workloads.
DDR5 4800 SO-DIMM Interface Limits
The DDR5 4800 SO-DIMM interface sets the maximum data rate and latency ceiling at 4800 MT/s and CL40 for this kit. Systems that only support lower DDR5 speeds or require ECC registered modules will not operate with these unbuffered 2Rx8 sticks.
Two-Module Laptop Installation
Installation follows the standard 262-pin SO-DIMM procedure: power down, open the memory door, align the notch, press in until the clips latch. The tight spacing on Mini-ITX boards can make the upper slot difficult to reach, so a thin tool or angled approach often helps.
Highlights
- 96GB total capacity for demanding workloads using two 48GB modules
- DDR5 4800 speed transfers data at PC5-38400 bandwidth
- CL40 CAS latency supports responsive system operation
- 1V low voltage reduces power draw and heat
- 262-pin SODIMM form factor fits ASRock IMB-X1244-WV motherboard
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered SODIMM Memory |
| Part Number | MS38400-4828K2 |
| Capacity | 96GB (2 x 48GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 262-Pin DDR5 SODIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 96GB (2 x 48GB) DDR5 4800MHz PC5-38400 2Rx8 1.1V 262-PIN Non-ECC SODIMM KIT |
Questions about this item
Should I choose the 96 GB kit or buy a single 48 GB module?
The 96 GB kit supplies two matched 48 GB SODIMMs that run together at DDR5 4800 CL40 1.1 V, giving dual-channel bandwidth the board is designed for.
What does the DDR5 4800 CL40 rating deliver inside the ASRock IMB-X1244-WV?
The modules operate at 4800 MT/s with a CAS latency of 40 cycles at 1.10 V, providing the maximum JEDEC-standard throughput the Mini-ITX platform supports.
Does the 262-pin DDR5 SODIMM interface limit speed or capacity on this motherboard?
The 262-pin DDR5 SODIMM form factor carries the full 4800 MT/s signal and each slot accepts a 48 GB 2Rx8 module, so the board can reach its 96 GB maximum.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



