NEMIX RAM
NEMIX RAM 96GB (2x48GB) DDR5 4800 CL40 1.1V 288-Pin UDIMM ASRock Z790 PG Riptide
96GB dual-channel DDR5 kit at 4800MHz CL40, 1.1V, 2Rx8, built for ASRock Z790 PG Riptide
- Capacity96GB (2 x 48GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 96 GB capacity supports heavy multitasking and large datasets
- 4800 MT/s DDR5 speed delivers high data throughput
- CL40 latency at 1.1 V balances timing and power efficiency
- 288-pin UDIMM form factor fits standard desktop DIMM slots
- Validated for ASRock Z790 PG Riptide motherboard compatibility
ASRock Z790 PG Riptide DDR5 Kit
This 96 GB kit contains two 48 GB DDR5 4800 CL40 UDIMMs built for the ASRock Z790 PG Riptide motherboard. Modules run at 1.1 V and use 2Rx8 unbuffered non-ECC chips without a heat spreader. The 288-pin DIMMs install in standard desktop slots for immediate capacity expansion.
Suits single-board 96 GB upgrades.
Builders who need exactly 96 GB on this board can populate both slots with one purchase. Systems that require ECC error correction, registered modules, lower CAS latency, or higher DDR5 speeds must choose a different specification. The kit does not support quad-channel configurations beyond the two modules supplied.
4800 MT/s DDR5 288-pin UDIMM at 1.1 V
The decisive figure is the 4800 MT/s DDR5 rating combined with 1.1 V operation on a 288-pin unbuffered DIMM. This speed and voltage pair determines whether the memory controller on the target motherboard will train stably at the rated CL40 timing. Verify the board's qualified vendor list for this exact frequency before ordering.
Highlights
- 96 GB capacity supports heavy multitasking and large datasets
- 4800 MT/s DDR5 speed delivers high data throughput
- CL40 latency at 1.1 V balances timing and power efficiency
- 288-pin UDIMM form factor fits standard desktop DIMM slots
- Validated for ASRock Z790 PG Riptide motherboard compatibility
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | ASRock Gaming Motherboard Compatible Series Memory |
| Model | ASRock DDR5 4800MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD38400-4828K2 |
| Capacity | 96GB (2 x 48GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 96GB (2X48GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT |
Questions about this item
Will the 288-pin DDR5 UDIMM modules fit the four DIMM slots on the ASRock Z790 PG Riptide?
Yes, the kit uses the standard 288-pin DDR5 UDIMM form factor that matches the four slots on the ASRock Z790 PG Riptide motherboard.
What is the correct slot order when installing the two 48 GB modules on the ASRock Z790 PG Riptide?
Install the modules in the two slots of the same colour, usually DIMM_A2 and DIMM_B2, to run in dual-channel mode.
Does the lack of a heat spreader on these 48 GB modules mean they will need active airflow later?
The modules run at 1.1 V without a heat spreader; ensure the case provides steady airflow over the DIMM area to keep temperatures in check.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



