NEMIX RAM
NEMIX RAM 8GB DDR5 4800MHz CL40 1Rx8 1.1V 288-Pin UDIMM ASUS Pro B760M-C-CSM/CT-CSM memory upgrade
8GB DDR5 4800MHz CL40 1Rx8 1.1V 288-pin UDIMM matched to ASUS Pro B760M-C-CSM and CT-CSM motherboards
- Capacity8GB
- Type288-Pin DDR5 UDIMM
- SpeedDDR5 4800 (PC5 38400)
- CAS LatencyCL40
- Voltage1.10V
- ECCNo
- Precise 4800 MHz DDR5 speed matches your motherboard's rated spec
- 1Rx8 CL40 1.1 V timing profile recognised instantly by the ASUS B760M memory controller
- 288-pin UDIMM form factor fits the desktop DIMM slots without adapters
- Major OEM Samsung Micron Hynix chips tested for stability at rated voltage
- Lifetime replacement warranty and free US-based technical support included
Exact-match 8GB DDR5-4800 UDIMM
This 8GB DDR5 module runs at 4800MHz with CL40 timing at 1.1V. It is built for the ASUS Pro B760M-C-CSM and Pro B760M-CT-CSM motherboards. The 288-pin unbuffered non-ECC design matches the board's memory controller requirements. It suits users upgrading those specific platforms with a single compatible stick.
Verified fitment for two ASUS boards
The module is validated for the exact DIMM population rules of the named ASUS motherboards. Major OEM chips from Samsung, Micron or Hynix are tested at rated speed and voltage. This removes guesswork around rank, timing and form factor compatibility. The kit contains only the memory stick itself with no extra accessories or software.
Single-rank 8GB capacity ceiling
One rank of 8GB provides a straightforward capacity increase for the supported boards. It handles everyday multitasking and standard desktop workloads within that limit. Systems needing more memory will require additional compatible modules populated per the motherboard manual. Buyers whose boards demand higher density or different voltage cannot use this module.
Highlights
- Precise 4800 MHz DDR5 speed matches your motherboard's rated spec
- 1Rx8 CL40 1.1 V timing profile recognised instantly by the ASUS B760M memory controller
- 288-pin UDIMM form factor fits the desktop DIMM slots without adapters
- Major OEM Samsung Micron Hynix chips tested for stability at rated voltage
- Lifetime replacement warranty and free US-based technical support included
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD38400-818K1 |
| Capacity | 8GB |
| Type | 288-Pin DDR5 UDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | ASUS |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 8GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Questions about this item
Will the 1Rx8 DDR5 module need any firmware updates or chip replacements later?
The module uses major OEM chips from Samsung, Micron or Hynix and runs at the rated 1.1 V CL40; no firmware updates or chip replacements are required during its service life.
What limit appears first when the 4800 MHz UDIMM runs under sustained load?
The CAS latency of CL40 at 1.1 V sets the timing boundary; the memory controller will not exceed the rated 4800 MT/s speed under continuous operation.
How much heat and power does the 8 GB DDR5 stick draw during all-day use?
Operating at 1.1 V without a heat spreader, the unbuffered UDIMM stays within standard DDR5 power limits and produces minimal heat during extended workloads.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



