We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 2Rx8 260-Pin SODIMM POSIFLEX JK-2452 Cachet Series Kiosk memory upgrade

SKU CH-V7H0-6TS8B

8GB DDR4 3200 CL22 2Rx8 SODIMM built for POSIFLEX JK-2452 Cachet Series kiosks

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • Designed for POSIFLEX JK-2452 Cachet Series kiosk systems
  • 8 GB DDR4 3200 CL22 module adds responsive capacity
  • 2 V operation reduces power draw in embedded deployments
  • 2Rx8 260-pin SODIMM fits the target motherboard slot
  • Major OEM Samsung, Micron, Hynix chips ensure reliable operation

System-specific SODIMM for POSIFLEX kiosks

This 8 GB DDR4 3200 module is built for the POSIFLEX JK-2452 Cachet Series kiosk. It uses a 260-pin SODIMM form factor with 2Rx8 organisation and runs at 1.20 V. The part is intended for service technicians and IT teams maintaining these point-of-sale terminals.

Straightforward slot-in upgrade

Installation follows the standard SODIMM procedure: power down the kiosk, open the memory compartment, align the notch and press until the clips lock. No heat spreader is fitted, so clearance is not an issue. The only common mistake is mixing this non-ECC unbuffered stick with registered or ECC modules, which the platform does not support.

Match DDR4 3200 CL22 2Rx8 exactly

The kiosk requires DDR4 3200 (PC4-25600) with CL22 latency, 2Rx8 rank configuration and 1.20 V operation. A module with different speed, latency, rank or voltage will not work reliably. Verify these four parameters against the service manual before ordering.

Highlights

  • Designed for POSIFLEX JK-2452 Cachet Series kiosk systems
  • 8 GB DDR4 3200 CL22 module adds responsive capacity
  • 2 V operation reduces power draw in embedded deployments
  • 2Rx8 260-pin SODIMM fits the target motherboard slot
  • Major OEM Samsung, Micron, Hynix chips ensure reliable operation

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

How can I confirm the 3200MHz SODIMM is running at the correct speed after installation?

Enter the system BIOS or use a tool such as CPU-Z to verify the memory frequency shows 3200MHz and the CAS latency reads CL22.

What does the package contain and is any extra hardware required?

The box includes one 8GB 260-pin DDR4 SODIMM module; no additional cables, brackets or tools are needed for installation.

Which NEMIX RAM module matches the POSIFLEX JK-2452 Cachet Series kiosk?

Choose the 8GB DDR4 3200 CL22 2Rx8 260-pin SODIMM with part number MS25600-828K1, built specifically for that system.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.