We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR4 SODIMM module with black chips and gold edge contacts

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 2Rx8 1.2V 260-pin SODIMM for POSIFLEX EK-1550

SKU CH-86KZ-8H78Z

8GB DDR4 3200 SODIMM module built for POSIFLEX EK-1550 kiosks with CL22 latency and 1.2V operation

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB capacity expands kiosk multitasking headroom
  • DDR4 3200 speed matches POSIFLEX EK-1550 specs
  • CL22 latency supports stable transaction processing
  • 2V operation reduces power draw in continuous use
  • 260-pin SODIMM fits Mercury Series kiosk slot

POSIFLEX EK-1550 kiosk memory upgrade

This NEMIX RAM module adds 8GB of DDR4 3200 memory to the POSIFLEX EK-1550 Mercury Series kiosk. It is a 260-pin SODIMM built for point-of-sale systems that require non-ECC unbuffered memory. The kit contains a single 8GB stick ready for installation.

DDR4 SODIMM speed and latency limits

The module runs at DDR4 3200 (PC4-25600) with a CAS latency of 22 at 1.20V. Performance is bounded by the JEDEC DDR4 3200 standard and the kiosk's memory controller. It will not operate faster than the platform's maximum supported data rate.

Check slot count and maximum capacity before

Verify the EK-1550 has a free SODIMM slot and confirm the system's maximum memory limit in the service manual. This 2Rx8 dual-rank module may not work if the board only accepts single-rank parts. Ensure the BIOS is current for full compatibility.

Highlights

  • 8GB capacity expands kiosk multitasking headroom
  • DDR4 3200 speed matches POSIFLEX EK-1550 specs
  • CL22 latency supports stable transaction processing
  • 2V operation reduces power draw in continuous use
  • 260-pin SODIMM fits Mercury Series kiosk slot

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Is this 8 GB module the only capacity available for the POSIFLEX EK-1550?

The part number MS25600-828K1 identifies an 8 GB DDR4 3200 SODIMM; other capacities would carry a different part number.

Will the 3200 MT/s rating run at that speed inside the EK-1550?

The module is rated DDR4 3200 (PC4-25600) and will operate at the highest speed the EK-1550 memory controller supports.

Does the 260-pin DDR4 SODIMM interface limit the bandwidth in this kiosk?

The 260-pin DDR4 SODIMM form factor carries the full PC4-25600 data path; actual throughput is governed by the EK-1550 memory controller.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.