NEMIX RAM
NEMIX RAM 8GB DDR4 3200 CL22 260-Pin SODIMM Dell Inspiron 24 AIO memory upgrade
8 GB DDR4 3200 SODIMM module built for Dell Inspiron 24 All-in-One systems
- Capacity8GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8GB capacity adds headroom for multitasking
- 3200 MHz DDR4 speed matches system spec
- CL22 latency suits standard workloads
- 20 V operation keeps power draw low
- 260-pin SODIMM fits Dell Inspiron 24 AIO
Dell Inspiron 24 AIO memory upgrade
This NEMIX RAM module adds 8GB of DDR4 3200 memory to compatible Dell Inspiron 24 All-in-One systems. It uses a 260-pin SODIMM form factor with CL22 latency and operates at 1.20V. The unbuffered, non-ECC design suits standard consumer workloads.
Replaces slower DDR4 modules or fills an empty slot
Swapping out lower-speed memory or adding capacity improves responsiveness when multitasking or running memory-hungry applications. The upgrade is worthwhile when the system currently runs below 3200 MT/s or has less than 8GB installed. No benefit appears if the platform already matches this speed and capacity.
Sustained load stability through validated
Modules are built with major OEM chips from Samsung, Micron or Hynix and stress-tested under load to ensure reliability during extended sessions. The 1Rx8 rank organisation and standard voltage maintain consistent throughput without thermal throttling in the compact AIO chassis.
Highlights
- 8GB capacity adds headroom for multitasking
- 3200 MHz DDR4 speed matches system spec
- CL22 latency suits standard workloads
- 20 V operation keeps power draw low
- 260-pin SODIMM fits Dell Inspiron 24 AIO
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Laptop, AIO All-in-One, Mobile Workstation Compatible Series Memory |
| Model | Dell DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-818K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Dell |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Questions about this item
Will this 260-pin SODIMM fit inside my Dell Inspiron 24 All-in-One?
Yes, the module is a 260-pin DDR4 SODIMM built to the Dell Inspiron 24 AIO form factor.
What is the correct way to seat the module, and what step do people often miss?
Insert the SODIMM at an angle until the gold contacts disappear, then press down firmly until both side clips click into the notches.
Does this stick need any future maintenance such as firmware updates or thermal-pad replacement?
No, it has no heat spreader, no firmware, and no moving parts; it runs at 1.20 V and requires no servicing.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



