NEMIX RAM
NEMIX RAM 8GB DDR4 3200 CL22 1.2V 288-pin UDIMM Dell SNPV0M5RC/8G AB120718
An 8 GB DDR4 UDIMM running at 3200 MHz with CL22 latency and 1.2 V operation
- Capacity8GB
- Type288-pin DDR4 UDIMM
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL22
- Voltage1.20V
- ECCNo
- 8 GB capacity adds responsive multitasking headroom
- DDR4 3200 speed feeds data to the CPU quickly
- CL22 latency keeps timing tight for everyday workloads
- 20 V operation reduces power draw and heat
- 288-pin UDIMM fits standard desktop motherboards
8 GB DDR4 UDIMM for Dell systems
This 8 GB DDR4 UDIMM runs at 3200 MT/s with CL22 timing and 1.20 V operation. It is built as a 1Rx8 non-ECC unbuffered module using major OEM Samsung, Micron or Hynix chips. The part is validated for Dell SNPV0M5RC/8G and AB120718 platforms.
288-pin desktop slot compatibility
The module fits any standard 288-pin DDR4 desktop DIMM socket and requires no heat spreader or extra clearance. It draws 1.2 V from the motherboard so no auxiliary power or BIOS voltage tuning is needed. Unbuffered design keeps the signal path direct for broad chipset support.
Sustained load stability
Every stick undergoes extended stress testing under load before shipment to verify long-term reliability. The 1.20 V rating and CL22 latency remain stable during continuous workloads without thermal throttling. Lifetime replacement coverage backs the validated endurance.
Highlights
- 8 GB capacity adds responsive multitasking headroom
- DDR4 3200 speed feeds data to the CPU quickly
- CL22 latency keeps timing tight for everyday workloads
- 20 V operation reduces power draw and heat
- 288-pin UDIMM fits standard desktop motherboards
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory |
| Model | Original Series DDR4 Desktop PC Memory Solutions |
| Part Number | MD25600-818K1 |
| Capacity | 8GB |
| Type | 288-pin DDR4 UDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
Questions about this item
Will the CL22 latency become a bottleneck when the module runs at 3200 MT/s for hours?
The module operates at DDR4 3200 with CL22 timing at 1.20 V. That combination is within standard JEDEC limits, so sustained throughput stays consistent without timing-related throttling.
Does the stick run hot or loud when it is under load all day?
There is no heat spreader and no active cooling on the UDIMM. Passive dissipation at 1.20 V keeps surface temperatures low, and the module produces no audible noise.
What motherboard slot and voltage must my system already provide for this 288-pin DDR4 UDIMM?
The board needs a standard 288-pin DDR4 DIMM slot that supplies 1.20 V and accepts non-ECC unbuffered modules.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



