We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 260-pin DDR4 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 2400 CL17 2Rx8 1.2V 260-pin SODIMM POSIFLEX XT-6515E JIVA memory upgrade

SKU CH-DW0S-BEH07

8 GB DDR4 2400 SODIMM module rated CL17 at 1.2 V for POSIFLEX XT-6515E JIVA terminals

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity expands POS terminal multitasking headroom
  • DDR4 2400 speed matches system memory bus
  • CL17 latency supports responsive transaction processing
  • 2 V operation keeps power draw low
  • 260-pin SODIMM form factor fits POSIFLEX XT-6515E JIVA slot

POSIFLEX XT-6515E JIVA memory upgrade

This 8 GB DDR4 SODIMM is built specifically for the POSIFLEX XT-6515E JIVA terminal. It runs at 2400 MT/s with a CAS latency of 17 and operates at 1.20 V. The module uses a 2Rx8 rank configuration on a 260-pin PCB without a heat spreader.

Suits technicians servicing this exact POS terminal

It fits the validated POSIFLEX POS platform and delivers non-ECC unbuffered operation. Buyers needing ECC error correction, registered signalling, higher speeds, larger capacities or a different form factor should look at other parts.

260-pin DDR4 SODIMM interface

The 260-pin DDR4 SODIMM form factor is the single specification that determines whether this module will install in the target system. Verify the terminal accepts 260-pin DDR4 SODIMMs before purchase.

Highlights

  • 8 GB capacity expands POS terminal multitasking headroom
  • DDR4 2400 speed matches system memory bus
  • CL17 latency supports responsive transaction processing
  • 2 V operation keeps power draw low
  • 260-pin SODIMM form factor fits POSIFLEX XT-6515E JIVA slot

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-828K1
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Is the single 8 GB SODIMM the only capacity offered for the POSIFLEX XT-6515E JIVA upgrade?

The listing describes one 8 GB module, part number MS19200-828K1, so that is the capacity available in this package.

Will the 2400 MHz DDR4 speed run at its rated frequency in the POSIFLEX terminal?

The module is specified as DDR4 2400 PC4-19200 CL17 1.20 V; the system will operate it at that speed if the platform supports DDR4 2400.

Does the 260-pin SODIMM fit the memory slot in the XT-6515E JIVA?

The module is a 260-pin DDR4 SODIMM built for the POSIFLEX XT-6515E JIVA, matching the terminal's slot type.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.