We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board SODIMM module with black memory chips, 260 pins, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 2400 CL17 2Rx8 1.2V 260-PIN SODIMM POSIFLEX RT-6115 memory upgrade

SKU CH-VSHN-TYVHG

An 8 GB DDR4 SODIMM rated at 2400 MHz CL17 and 1.2 V, built for the POSIFLEX RT-6115 terminal

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB capacity boosts POS terminal multitasking
  • DDR4 2400 speed matches POSIFLEX RT-6115 spec
  • CL17 latency supports responsive transaction processing
  • 20V operation reduces terminal power draw
  • 260-pin SODIMM fits POSIFLEX RT-6115 slot

POSIFLEX RT-6115 Compatible SODIMM

This 8 GB DDR4 module is built for the POSIFLEX RT-6115 stylish slim terminal. It fits the 260-pin SODIMM slot and runs at 2400 MT/s with a CL17 latency. The unbuffered, non-ECC design matches the terminal's original specification.

Upgrade from 4 GB or a slower stick

Replacing a 4 GB module doubles the memory available to the POS application and operating system. Moving from a lower-speed DDR4 SODIMM to this 2400 MT/s part removes a memory bandwidth bottleneck when the terminal runs multiple services.

Steady operation under continuous POS loads

The module uses major OEM chips from Samsung, Micron or Hynix and is stress-tested under load. It maintains 1.20 V operation without a heat spreader, so thermals stay predictable during long retail shifts.

Highlights

  • 8GB capacity boosts POS terminal multitasking
  • DDR4 2400 speed matches POSIFLEX RT-6115 spec
  • CL17 latency supports responsive transaction processing
  • 20V operation reduces terminal power draw
  • 260-pin SODIMM fits POSIFLEX RT-6115 slot

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-828K1
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Will the 260-pin SODIMM fit the POSIFLEX RT-6115 slot?

Yes, the module is a 260-pin DDR4 SODIMM built for the POSIFLEX RT-6115 terminal.

Do I need to change any BIOS settings when installing this CL17 module?

Install the SODIMM with the system powered off; the BIOS will detect the 2400 MHz speed and CL17 timing automatically.

Does the 1.2 V DDR4 module need any future maintenance or replacement?

No scheduled maintenance is required; the unbuffered non-ECC SODIMM runs at 1.20 V and is covered by a lifetime replacement warranty.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.