NEMIX RAM
NEMIX RAM 8GB DDR3 1600 PC3-12800 1.35V 204-Pin SODIMM Samsung M471B1G73EB0-YK0 memory upgrade
8GB DDR3 1600 SODIMM laptop memory upgrade at 1.35V with Samsung compatibility
- Capacity4GB
- SpeedDDR3 1600 (PC3 12800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.35V
- 8 GB capacity expands laptop multitasking headroom
- DDR3 1600 MHz speed matches PC3-12800 system specs
- Low 1.35 V voltage reduces power draw and heat
- 204-pin SODIMM form factor fits compatible Samsung laptops
- Built with major-brand Samsung, Micron or Hynix chips for reliability
Samsung Laptop DDR3 SODIMM
This NEMIX RAM module delivers 8 GB of DDR3 1600 memory in a 204-pin SODIMM form factor. It operates at 1.35 V with CL11 latency and uses a 2Rx8 unbuffered non-ECC design built with Samsung chips. The part number is MS12800-428K1 and it is validated for Samsung laptop and all-in-one systems.
Fits Samsung DDR3 1600 platforms
Buyers upgrading a compatible Samsung laptop or all-in-one PC that accepts 1.35 V DDR3 1600 SODIMMs can install this module for a straightforward capacity increase. Systems requiring ECC registered memory, a different voltage, a different pin count or a newer DDR generation will not accept this part.
1.35 V DDR3 1600 SODIMM
The single specification that determines fit is the 1.35 V DDR3 1600 204-pin SODIMM interface. If the target machine specifies this exact voltage, speed and form factor the module will seat and run at CL11; otherwise it is electrically or mechanically incompatible.
Highlights
- 8 GB capacity expands laptop multitasking headroom
- DDR3 1600 MHz speed matches PC3-12800 system specs
- Low 1.35 V voltage reduces power draw and heat
- 204-pin SODIMM form factor fits compatible Samsung laptops
- Built with major-brand Samsung, Micron or Hynix chips for reliability
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | Samsung Laptop, AIO All-in-One PC Compatible Series Memory |
| Model | Samsung DDR3 1600MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS12800-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1600 (PC3 12800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.35V |
| Compatible System | Samsung |
| CAS Latency | CL11 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR3 1600MHZ PC3-12800 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Questions about this item
My laptop only has DDR3 slots — will this 204-pin SODIMM fit and run at 1.35 V?
Yes, the module is a 204-pin DDR3 SODIMM rated for 1.35 V, so it fits standard DDR3 laptop slots and operates at the correct low voltage.
I plan to keep my existing 4 GB DDR3 1600 stick — can I add this 8 GB module alongside it?
You can pair it with another DDR3 1600 SODIMM; both will run at 1600 MHz with CL11 timings, though the system will operate in single-channel mode because the capacities differ.
After installing the module, how can I confirm it is running at the rated 1600 MHz and 1.35 V?
Open Task Manager's Performance tab or a tool like CPU-Z; the memory section should show 1600 MHz speed and 1.35 V DRAM voltage.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



