NEMIX RAM
NEMIX RAM 8GB DDR3 1333MHz PC3-10600 1.35V 204-Pin SODIMM Laptop RAM
8GB DDR3 1333MHz SODIMM laptop memory module with CL9 latency and 1.5V operation
- Capacity8GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Voltage1.50V
- ECCNo
- 8 GB capacity expands multitasking headroom for everyday workloads
- DDR3 1333 MHz speed matches PC3-10600 system requirements
- Low 1.35 V operation reduces power draw in compatible laptops
- 204-pin SODIMM form factor fits standard laptop memory slots
- CL9 latency supports responsive data access timing
DDR3 SODIMM upgrade for laptops and NAS
This 8 GB DDR3 1333 MHz module uses the 204-pin SODIMM form factor and runs at 1.50 V with CL9 latency. It suits laptops, all-in-one PCs, small-form-factor desktops and NAS devices that accept PC3-10600 unbuffered non-ECC memory.
Single-module simplicity
The stick ships alone in an 8 GB capacity so you fill one slot without matching pairs. No heat spreader or extra software is included; the gain comes purely from adding addressable memory to a compatible system.
Green-circuit board with gold-edge contacts
The bare PCB keeps height low for tight chassis while the 204 gold-plated pins ensure reliable seating in SODIMM sockets. Unbuffered, non-ECC design means it works in standard consumer platforms but not in registered or ECC-only server boards.
Highlights
- 8 GB capacity expands multitasking headroom for everyday workloads
- DDR3 1333 MHz speed matches PC3-10600 system requirements
- Low 1.35 V operation reduces power draw in compatible laptops
- 204-pin SODIMM form factor fits standard laptop memory slots
- CL9 latency supports responsive data access timing
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR3 Orignial Series 204-Pin NON-ECC Unbuffered SODIMM Memory |
| Model | DDR3 NON- ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory |
| Part Number | MS10600-828K1 |
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | DDR3 Laptop, AIO All-in-One, SFF, NAS Device Compatible |
Questions about this item
Will the 8GB DDR3 SODIMM need any firmware updates or component replacements during its service life?
The module has no heat spreader and is unbuffered non-ECC, so it has no firmware or user-serviceable parts; it either works or is replaced under the lifetime warranty.
What limit appears first when the 1333MHz CL9 stick runs at full load for hours?
The DDR3-1333 bus and CL9 latency set the throughput ceiling; sustained bandwidth cannot exceed the PC3-10600 rating.
How much heat and power does the 1.35V low-voltage module produce in all-day operation?
Rated at 1.35V with no heat spreader, it draws less power and runs cooler than standard 1.50V DDR3 SODIMMs.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



