NEMIX RAM
NEMIX RAM 8GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM POSIFLEX KS-7412
8GB DDR3 1333 SODIMM for POSIFLEX KS-7412 terminal, 1.35V low voltage, CL9 latency
- Capacity8GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- 8 GB capacity expands POS terminal multitasking headroom
- DDR3 1333 speed matches system bus for stable operation
- 35 V low-voltage design reduces power draw and heat
- 204-pin SODIMM form factor fits POSIFLEX KS-7412 slot directly
- 2Rx8 dual-rank organisation optimises memory controller efficiency
POSIFLEX KS-7412 targeted upgrade
This SODIMM is built specifically for the POSIFLEX KS-7412 compact fanless point-of-sale terminal. It provides 8GB of DDR3 memory in a single 204-pin module that matches the system's original specification. The part is intended for technicians maintaining or expanding these kiosk platforms.
Steady operation under continuous duty
The module runs at 1333 MT/s with CL9 latency and operates at 1.50V, delivering consistent throughput during long transaction cycles. Major OEM DRAM from Samsung, Micron or Hynix is stress-tested under load to sustain stability in always-on retail environments. Unbuffered non-ECC organisation keeps latency low for the terminal's embedded workload.
Direct-fit 204-pin form factor
The stick uses a standard 204-pin DDR3 SODIMM edge connector with no heat spreader, allowing it to slide into the KS-7412's tight internal slot without clearance issues. Rank is 2Rx8, matching the platform's memory controller expectations. Installation follows the terminal's service manual and requires no additional cabling or brackets.
Highlights
- 8 GB capacity expands POS terminal multitasking headroom
- DDR3 1333 speed matches system bus for stable operation
- 35 V low-voltage design reduces power draw and heat
- 204-pin SODIMM form factor fits POSIFLEX KS-7412 slot directly
- 2Rx8 dual-rank organisation optimises memory controller efficiency
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-828K1 |
| Capacity | 8GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Questions about this item
Does the 1.35 V rating keep heat and power draw low during continuous POS terminal operation?
The module runs at 1.35 V, reducing power consumption and thermal output compared to standard 1.50 V DDR3, which helps the fanless KS-7412 stay cool during all-day use.
What must the POSIFLEX KS-7412 already have for this 204-pin SODIMM to install and function?
The terminal needs a free DDR3 SODIMM slot that accepts 2Rx8 unbuffered non-ECC modules at 1333 MHz; no additional hardware or adapters are required.
Will this 8 GB DDR3 1333 stick work alongside the original 4 GB module already in my KS-7412?
Yes, it is compatible with the KS-7412 and will run in dual-channel mode if the existing module is also DDR3 1333 CL9 unbuffered non-ECC, otherwise the system will operate at the slower module's speed.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



