We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR3 SODIMM module with black chips and gold contacts

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 PC3-10600 1.35V 204-PIN SODIMM POSIFLEX XT-5515

SKU CH-YR3J-DXH8Q

8GB DDR3 1333 SODIMM module designed for the POSIFLEX XT-5515 terminal

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB capacity expands POS terminal multitasking headroom
  • DDR3 1333 speed matches POSIFLEX XT-5515 memory bus
  • 35V low-voltage operation reduces system power draw
  • 204-pin SODIMM form factor fits the terminal slot directly
  • Major OEM chips deliver tested reliability for continuous use

POSIFLEX XT-5515 memory upgrade

This 8 GB DDR3 SODIMM is built specifically for the POSIFLEX XT-5515 JIVA foldable 15-inch terminal. It delivers a direct drop-in upgrade for point-of-sale systems that need more headroom for transaction software. The module arrives new and ready for immediate installation.

Suited for POS terminal owners.

The stick fits the XT-5515 and compatible POSIFLEX POS platforms that accept 204-pin DDR3 SODIMMs at 1333 MHz. Buyers upgrading standard consumer laptops, desktop motherboards, or any system outside the POSIFLEX POS series should look at something else.

Fits the terminal SODIMM slot.

Installation uses the existing memory slot inside the terminal, requiring no extra cabling or brackets. The single 8 GB rank leaves no second module to manage, simplifying service while expanding the memory ceiling for multi-application point-of-sale loads.

Highlights

  • 8GB capacity expands POS terminal multitasking headroom
  • DDR3 1333 speed matches POSIFLEX XT-5515 memory bus
  • 35V low-voltage operation reduces system power draw
  • 204-pin SODIMM form factor fits the terminal slot directly
  • Major OEM chips deliver tested reliability for continuous use

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Does the POSIFLEX XT-5515 terminal need a free 204-pin SODIMM slot to accept this module?

Yes, the 8 GB DDR3 1333 PC3-10600 SODIMM fits a single 204-pin slot in the POSIFLEX XT-5515 or JIVA Foldable 15" terminal.

Can I keep the original memory installed and add this 8 GB stick for a total of two modules?

The kit is a single 8 GB 2Rx8 module; whether a second slot is free depends on the terminal's current configuration and maximum supported capacity.

How can I verify the module is running at DDR3 1333 with CL9 timing after installation?

Check the system BIOS or a utility such as CPU-Z; it should report 1333 MT/s, PC3-10600 and CAS latency 9 for the new SODIMM.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.