We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB (2x4GB) DDR3 1600MHz CL11 1.35V 204-Pin SODIMM Kit for Apple iMac Late 2012–Mid 2015

SKU CH-CT0R-PB831

8 GB kit of two DDR3 1600 MHz SODIMMs at 1.35 V for iMac models from 2012 to 2015

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1600 (PC3 12800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.35V
  • Ready for iMac Late 2012 through Mid 2015
  • 8 GB kit (2 × 4 GB) adds responsive multitasking
  • DDR3 1600 MHz CL11 matches factory timing
  • Low 1.35 V operation runs cool and stable
  • 204-pin SODIMM form factor fits the memory slot

Apple iMac DDR3 SODIMM kit

This NEMIX RAM kit supplies 8 GB of DDR3 1600 memory in two 4 GB modules built to the 204-pin SODIMM form factor. The sticks run at 1.35 V with CL11 latency and use unbuffered non-ECC chips sourced from major OEM suppliers. They are validated for Apple iMac models released between late 2012 and mid 2015.

Owners of compatible iMacs wanting

The dual-rank 2Rx8 organisation matches the factory specification for these all-in-one desktops. Users who need ECC error correction, registered modules, higher capacities per slot, or memory for Windows laptops, newer Macs or PC motherboards should look at other products.

Ready-to-install matched pair

The kit delivers two modules tested together so they operate in dual-channel mode without further configuration. No heat spreaders are included, keeping the low-profile height required by the iMac's internal slot spacing. No software or drivers are bundled.

Highlights

  • Ready for iMac Late 2012 through Mid 2015
  • 8 GB kit (2 × 4 GB) adds responsive multitasking
  • DDR3 1600 MHz CL11 matches factory timing
  • Low 1.35 V operation runs cool and stable
  • 204-pin SODIMM form factor fits the memory slot

Specifications

BrandNEMIX RAM
SeriesApple iMac/Mac Mini Compatible Series Memory
ModelApple DDR3 1600MHZ Non-ECC Unbuffered SODIMM
Part NumberMS12800-428K2
Capacity8GB (2 x 4GB)
SpeedDDR3 1600 (PC3 12800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.35V
Compatible SystemApple
CAS LatencyCL11
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (2X4GB) DDR3 1600MHZ PC3-12800 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

Questions about this item

Which iMac models accept this 204‑pin DDR3 SODIMM kit?

The kit is validated for Apple iMac models released from late 2012 through mid 2015.

Can I mix these 1.35 V modules with the original 1.5 V memory already in my iMac?

Yes — the memory controller will run both kits at the lower 1.35 V, so the original sticks stay compatible.

How do I confirm the CL11 1600 MHz modules are recognised at full speed after install?

Open About This Mac → System Report → Memory and verify each slot shows 4 GB DDR3 at 1600 MHz.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.