We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 SODIMM modules with gold contacts and black chips

NEMIX RAM

NEMIX RAM 8GB (2x4GB) DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM for POSIFLEX HC-1521P memory upgrade

SKU CH-C04C-G6GV2

8 GB DDR3 SODIMM kit for POSIFLEX HC-1521P terminal, 1333 MHz CL9, 1.35 V, 204-pin

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX HC-1521P terminals for guaranteed fit
  • 8 GB kit (2 × 4 GB) expands multitasking headroom
  • DDR3 1333 PC3-10600 CL9 matches original spec
  • Low-voltage 1.35 V modules reduce power draw
  • Built with major-brand Samsung Micron Hynix chips

POSIFLEX HC-1521P memory kit

This 8 GB kit contains two 4 GB DDR3 SODIMM modules built for the POSIFLEX HC-1521P terminal. Each module runs at 1333 MHz with CL9 latency and 1.35 V operation. The 204-pin form factor fits the system's memory slots directly.

Suits service technicians upgrading that terminal

Technicians servicing a POSIFLEX HC-1521P can install this matched pair without configuration changes. Builders working on any other platform should look elsewhere because the kit is validated only for that specific terminal model.

2Rx8 organisation with major-brand chips

Each module uses a 2Rx8 rank layout populated with Samsung, Micron or Hynix components. That organisation determines whether the terminal's memory controller recognises the full 8 GB capacity.

Highlights

  • Designed for POSIFLEX HC-1521P terminals for guaranteed fit
  • 8 GB kit (2 × 4 GB) expands multitasking headroom
  • DDR3 1333 PC3-10600 CL9 matches original spec
  • Low-voltage 1.35 V modules reduce power draw
  • Built with major-brand Samsung Micron Hynix chips

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K2
Capacity8GB (2 x 4GB)
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (2X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

Questions about this item

What limits sustained throughput on this DDR3-1333 kit?

The 1333 MT/s data rate and CL9 latency set the bandwidth ceiling during continuous workloads.

How much heat and power does the 1.35 V kit produce all day?

Low-voltage 1.35 V operation keeps power draw and thermal output minimal in the POSIFLEX HC-1521P chassis.

Which slot type must the POSIFLEX HC-1521P already have for these modules?

The terminal needs two free 204-pin DDR3 SODIMM sockets to accept the 2Rx8 kit.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.