We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 UDIMM sticks in a row

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR5 5600MHz CL46 1.1V 288-Pin UDIMM memory upgrade

SKU CH-0FTY-KPDA6

Four 16 GB DDR5 modules at 5600 MHz with CL46 latency for Dell Pro Max Slim desktops

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB total capacity from four 16 GB modules
  • DDR5 5600 MHz speed rated as PC5-44800
  • Low 1.1 V operating voltage for efficient power use
  • CL46 CAS latency with 1Rx8 single-rank organisation
  • 288-pin UDIMM form factor built for Dell Pro Max Slim Desktop

64GB DDR5 kit for Dell Pro Max Slim

This NEMIX RAM kit delivers 64GB across four 16GB modules running at DDR5 5600 with CL46 latency. It is built as non-ECC unbuffered UDIMMs at 1.1V for the Dell Pro Max Slim desktop. The 288-pin form factor matches the board slots exactly.

Replaces slower DDR5 or fills empty slots

Swapping lower-speed DDR5 for this 5600MHz kit raises bandwidth to PC5-44800 without changing voltage. The upgrade is worthwhile when the system currently runs at a lower DDR5 data rate or when all four slots are vacant and maximum capacity is needed.

Four-module layout uses every slot

The 4x16GB configuration occupies all UDIMM sockets on the motherboard, leaving no room for further expansion. No heat spreaders are fitted, so clearance around the CPU cooler is unaffected. The kit requires a board that supports 1Rx8 DDR5 UDIMMs at 1.1V.

Highlights

  • 64 GB total capacity from four 16 GB modules
  • DDR5 5600 MHz speed rated as PC5-44800
  • Low 1.1 V operating voltage for efficient power use
  • CL46 CAS latency with 1Rx8 single-rank organisation
  • 288-pin UDIMM form factor built for Dell Pro Max Slim Desktop

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K4
Capacity64GB (4 x 16GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (4 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Questions about this item

Will the 288-pin DDR5 UDIMM modules fit the Dell Pro Max Slim Desktop motherboard slots?

Yes, the kit uses standard 288-pin DDR5 UDIMM form factor that matches the Dell Pro Max Slim Desktop memory slots.

What is the correct order for installing the four 16GB modules to avoid a boot failure?

Populate the motherboard slots in the sequence shown in the Dell service manual, usually alternating channels, so the 1Rx8 ranks initialise correctly.

When should the 1.10V DDR5 memory be replaced if ECC errors appear in system logs?

Replace the kit when the BIOS or OS reports uncorrectable memory errors, since these non-ECC modules cannot correct single-bit faults.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.