NEMIX RAM
NEMIX RAM 64GB 4x16GB DDR5 5600 CL46 1Rx8 1.1V 288-pin UDIMM memory upgrade
64 GB kit of four 16 GB DDR5 modules running at 5600 MHz with CL46 latency, 1.1 V operation and 288-pin UDIMM form factor, validated for ASRock Rack W880D4U-2L2T motherboards
- Capacity64GB (4 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB total capacity from four 16 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- Low 1.10 V operating voltage for efficient power use
- CL46 CAS latency tuned for responsive system performance
- Validated for ASRock Rack W880D4U-2L2T motherboard compatibility
System-Specific DDR5 Kit
This 64GB kit contains four 16GB DDR5 modules built for the ASRock Rack W880D4U-2L2T motherboard. It targets system builders and IT teams who need validated memory for that specific platform. The unbuffered non-ECC design suits desktop and workstation workloads rather than registered server configurations. Buyers who require ECC protection or registered DIMMs for other server boards should look elsewhere.
Sustained Load Behaviour
Rated at 5600MT/s with CL46 latency, the modules operate at the standard JEDEC voltage of 1.10V. Each stick uses a single-rank 1Rx8 organisation, which helps maintain stable throughput during extended compute sessions. Without a heat spreader, the DRAM relies on case airflow to manage temperature during prolonged heavy allocation. Systems that restrict internal airflow may see higher DRAM temperatures under continuous load.
Thermals Noise and Power
The 1.10V operating voltage keeps power draw low for a 64GB population. Bare modules produce no mechanical noise and add minimal thermal load when chassis ventilation is adequate. In enclosures with restricted airflow, the absence of a spreader can let component temperatures rise above modules fitted with metal shields. Ensure the target chassis provides direct airflow over the DIMM slots for best thermal results.
Highlights
- 64 GB total capacity from four 16 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- Low 1.10 V operating voltage for efficient power use
- CL46 CAS latency tuned for responsive system performance
- Validated for ASRock Rack W880D4U-2L2T motherboard compatibility
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (4 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Questions about this item
Does the 1.1 V operating voltage keep the 5600 MHz kit cool during continuous workloads?
The modules run at the standard DDR5 voltage of 1.10 V without a heat spreader, so case airflow determines temperatures under sustained load.
What motherboard slot layout is required for the four 288-pin UDIMMs to operate?
A board with four DDR5 UDIMM slots — such as the ASRock Rack W880D4U-2L2T — is needed to install the full 64 GB kit.
Will the CL46 1Rx8 modules work in a system that currently runs slower DDR5 memory?
The kit will downclock to match the slowest installed DDR5 modules, but all sticks must be non-ECC unbuffered UDIMMs for compatibility.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



