NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 1.1V UDIMM for MSI MEG Z790 GODLIKE MAX memory upgrade
A 64 GB DDR5 kit of four 16 GB unbuffered UDIMMs running at 5600 MT/s CL46 on 1.1 V, validated for the MSI MEG Z790 GODLIKE MAX
- Capacity64GB (4 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64GB kit gives headroom for heavy multitasking
- DDR5 5600 speed moves data faster
- CL46 latency keeps response tight
- 10V operation reduces power draw
- 288-pin UDIMM fits the MSI MEG Z790 GODLIKE MAX
MSI MEG Z790 GODLIKE MAX 64GB DDR5 Kit
This NEMIX RAM kit delivers 64 GB across four 16 GB DDR5 UDIMM modules. The memory runs at 5600 MT/s with CL46 latency at 1.10 V. It is built for the MSI MEG Z790 GODLIKE MAX motherboard and uses unbuffered non-ECC chips from major OEM suppliers.
Upgrade From Slower DDR5 or Smaller Capacity
Replacing slower DDR5 or a lower-capacity kit with this 5600 MT/s 64 GB set raises bandwidth and headroom for heavy multitasking and content creation. The jump is worthwhile when your current memory limits throughput or forces excessive paging.
Suits Builders Targeting This Specific Board
The kit suits enthusiasts and professionals populating all four slots on the MSI MEG Z790 GODLIKE MAX with validated modules. Buyers needing ECC, registered DIMMs, lower latency at this speed, or compatibility with a different platform should look elsewhere.
Highlights
- 64GB kit gives headroom for heavy multitasking
- DDR5 5600 speed moves data faster
- CL46 latency keeps response tight
- 10V operation reduces power draw
- 288-pin UDIMM fits the MSI MEG Z790 GODLIKE MAX
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | MSI Gaming Motherboard Compatible Series Memory |
| Model | MSI DDR5 5600MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD44800-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | MSI |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT |
Questions about this item
Will the 288-pin DDR5 UDIMM modules fit the four DIMM slots on the MSI MEG Z790 GODLIKE MAX board?
Yes, the kit provides four 288-pin DDR5 UDIMM sticks that match the board's four memory slots for a 64GB total.
What is the correct order to seat the four 1Rx8 modules so the board recognises the full 64GB at 5600 MT/s?
Populate the slots specified in the motherboard manual — usually the second and fourth slots from the CPU first, then the remaining pair — and press each module down until the retention clips click.
Does the absence of a heat spreader mean the 1.10V modules will need active airflow to stay stable under load?
The JEDEC-standard 1.10V operation keeps thermals low; typical case airflow is sufficient, but adding a fan over the DIMM area helps during sustained heavy workloads.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



