NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 1.1V UDIMM ASRock IMB-A1302/A1700 memory upgrade
64 GB DDR5 kit with four 16 GB UDIMM modules at 5600 MHz, CL46 and 1.1 V for ASRock IMB-A1302 and IMB-A1700
- Capacity64GB (4 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB total capacity across four 16 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- Low 1.10 V operating voltage reduces power draw
- CL46 CAS latency for responsive system performance
- Validated for ASRock Industrial IMB-A1302 and IMB-A1700 motherboards
Capacity and fit
This 64 GB kit contains four 16 GB DDR5 UDIMM modules built for ASRock Industrial IMB-A1302 and IMB-A1700 micro-ATX boards. It targets system integrators and IT teams who need a validated memory upgrade for those specific platforms.
Speed and timing
The modules run at DDR5 5600 (PC5-44800) with a CAS latency of CL46 at 1.10 V. That single speed-and-latency combination decides whether the kit matches the motherboard’s qualified vendor list.
Thermals and power
Operating at the standard 1.10 V without a heat spreader keeps power draw low and noise non-existent. The unbuffered, non-ECC design adds no active cooling requirement in normal desktop workloads.
Highlights
- 64 GB total capacity across four 16 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- Low 1.10 V operating voltage reduces power draw
- CL46 CAS latency for responsive system performance
- Validated for ASRock Industrial IMB-A1302 and IMB-A1700 motherboards
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock Industrial |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (4 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Questions about this item
Will the 5600 MHz speed run at full rate on the ASRock IMB-A1302 or IMB-A1700?
The kit is rated DDR5 5600 (PC5-44800). The board's memory controller and BIOS determine the final operating speed; it may downclock if the platform specifies a lower maximum.
Does the 288-pin DDR5 UDIMM interface limit bandwidth compared to registered DIMMs?
Unbuffered UDIMMs connect directly to the memory controller without a register, so latency is lower but the platform typically caps total capacity and rank count compared to registered memory.
Will the four 16 GB modules fit the two DIMM slots on a Micro-ATX board?
The IMB-A1302 and IMB-A1700 are Micro-ATX boards that usually provide four DDR5 UDIMM slots, so the 4×16 GB kit occupies all available slots.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



