NEMIX RAM 64GB (2x32GB) DDR5-4800 CL40 2Rx8 ECC Registered RDIMM Supermicro H14DSG-O-CPU memory upgrade
- 64GB (2 x 32GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
Four 16 GB DDR5 4800 RDIMM modules with ECC and registered buffering deliver 64 GB for the Supermicro H13DSG-O-CPU-D motherboard
Size 64GB 4X16GB
This NEMIX RAM kit delivers 64 GB of DDR5 4800 registered ECC memory in a 4 x 16 GB configuration. It matches the Supermicro H13DSG-O-CPU-D motherboard's required 288-pin RDIMM form factor, 1.1 V voltage and CL40 timing. The modules use 1Rx8 organisation with major OEM chips for enterprise stability.
Server administrators upgrading or populating a Supermicro H13DSG-O-CPU-D system with the exact registered ECC specification the board expects. Builders needing unbuffered UDIMM or SODIMM modules cannot use this kit. Systems requiring different speeds, voltages or capacities must select a validated alternative.
The DDR5 4800 (PC5-38400) registered ECC design with 1Rx8 rank organisation is the decisive specification. It ensures the memory controller recognises every module at full capacity and rated speed while ECC corrects single-bit errors on the fly. Verify your motherboard manual for supported population rules before purchase.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB 4X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Yes, the kit uses the 288-pin Registered RDIMM form factor that the H13DSG-O-CPU-D requires; it is not a UDIMM or SODIMM and matches the board's physical slot keying.
Populate all four slots following the motherboard manual's DIMM population sequence for a 4-module configuration; the kit is spec-matched to those population rules.
No heat spreader is fitted and none is required; the 1.10 V DDR5 modules run within standard thermal limits, so only occasional dust removal from the server chassis is needed.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?