NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR5 4800 CL40 1.1V UDIMM for ASUS ProArt Z790-CREATOR WiFi memory upgrade
A 64 GB kit of four 16 GB DDR5 4800 CL40 1.1 V UDIMM modules validated for the ASUS ProArt Z790-CREATOR WiFi motherboard
- Capacity64GB (4 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB total capacity from four 16 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- Low 1.10 V operating voltage for efficient power draw
- CL40 CAS latency with 1Rx8 single-rank organisation
- Validated compatibility with ASUS ProArt Z790-CREATOR WiFi motherboard
Capacity and platform match
This 64 GB kit contains four 16 GB DDR5 UDIMM modules built for the ASUS ProArt Z790-CREATOR WiFi motherboard. It targets workstation users who need maximum supported memory capacity for content creation, rendering or virtualization workloads. The modules are non-ECC and unbuffered, matching the board’s consumer-class memory controller. No heat spreader is fitted, so clearance is minimal.
DDR5 4800 practical limits
The kit runs at DDR5 4800 (PC5-38400) with a CAS latency of CL40 at 1.10 V. This is the baseline JEDEC speed for DDR5, so the memory controller will not require manual tuning to reach the rated frequency. Bandwidth and latency are fixed at this specification; higher data rates or tighter timings are not supported by this module. The 288-pin form factor fits only DDR5 slots.
Pre-order checklist
Confirm that your motherboard is the exact ASUS ProArt Z790-CREATOR WiFi model, as compatibility is validated for this board only. Verify that all four DIMM slots are free and that the BIOS is updated to a version supporting 64 GB of non-ECC UDIMM memory. The kit uses 1Rx8 Samsung, Micron or Hynix ICs; mixed-rank populations are not covered by this validation.
Highlights
- 64 GB total capacity from four 16 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- Low 1.10 V operating voltage for efficient power draw
- CL40 CAS latency with 1Rx8 single-rank organisation
- Validated compatibility with ASUS ProArt Z790-CREATOR WiFi motherboard
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | ASUS Server Motherboard Compatible Series Memory |
| Model | ASUS DDR5 4800MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD38400-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASUS |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT |
Questions about this item
Should I pick the 4x16GB kit or a different capacity for the ASUS ProArt Z790-CREATOR WiFi?
The 64GB (4x16GB) kit fills all four DIMM slots on the board and runs at DDR5 4800 with CL40 latency.
What does the 4800 MT/s rating deliver once installed in the ProArt Z790-CREATOR WiFi?
The modules operate at DDR5 4800 (PC5-38400) with 1.10V and CL40 timing, giving the rated bandwidth and latency out of the box.
Is the 288-pin DDR5 UDIMM interface the limiting factor for speed on this motherboard?
The kit uses standard 288-pin DDR5 UDIMM slots; the motherboard's memory controller and BIOS determine the maximum supported data rate.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



