We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 UDIMM sticks in a kit

NEMIX RAM

NEMIX RAM 64GB (4 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM server RAM

SKU CH-95S7-BCTKZ

A 64 GB DDR5 kit of four 16 GB modules running at 5600 MHz with CL46 latency and 1.1 V operation

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 5600 (PC5 44800)
  • CAS Latency46
  • Voltage1.1V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 64 GB total capacity from four 16 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • Low 1.1 V operation reduces power draw
  • Non-ECC unbuffered design for standard desktop boards
  • 1Rx8 single-rank layout with CL46 latency

Capacity and configuration

This kit provides 64GB of DDR5 memory arranged as four 16GB unbuffered UDIMM modules. It is intended for desktop or workstation platforms that accept non-ECC DDR5 at 5600MHz and need a single-rank 1Rx8 layout.

Sustained-load behaviour

The modules operate at the standard 1.1V JEDEC voltage with a CAS latency of 46 cycles. At this voltage and speed the kit maintains stable throughput during extended workloads without requiring elevated voltages or active cooling beyond normal chassis airflow.

Installation notes

Each stick uses the 288-pin DDR5 keying so it only fits DDR5 slots. Builders who need ECC protection, registered modules or a different rank organisation cannot use this kit. Check the motherboard manual for maximum supported capacity per slot and per channel before purchase.

Highlights

  • 64 GB total capacity from four 16 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • Low 1.1 V operation reduces power draw
  • Non-ECC unbuffered design for standard desktop boards
  • 1Rx8 single-rank layout with CL46 latency

Specifications

BrandNEMIX RAM
ModelPart#: MD44800-618K4-SM-AS-1015A-MT-01-G2
Part NumberPart#: MD44800-618K4-SM-AS-1015A-MT-01-G2
Capacity64GB (4 x 16GB)
SpeedDDR5 5600 (PC5 44800)
CAS Latency46
Voltage1.1V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix

Questions about this item

Does the 1.1 V operating voltage keep heat and power draw low during continuous all-day use?

Yes, the modules run at 1.1 V, which is the standard DDR5 voltage, so power consumption and thermal output stay modest even under sustained load.

What motherboard feature must I already have to install this 288-pin kit?

You need a desktop board with four DDR5 UDIMM slots that support 5600 MT/s operation and non-ECC unbuffered memory.

Will the 1Rx8 rank layout on these DDR5 DIMMs work alongside any older DDR5 sticks I keep?

Mixing ranks is possible on DDR5 platforms, but stability depends on the memory controller; using identical 1Rx8 modules across all populated slots gives the most reliable result.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.