NEMIX RAM 64GB (2x32GB) DDR4 2933MHz ECC UDIMM CL21 1.2V 288-Pin memory upgrade
- 64GB (2 x 32GB)
- 288-Pin DDR4 ECC UD…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
64 GB DDR4-3200 ECC UDIMM kit (4×16 GB, CL22, 1.2 V) verified for Supermicro X12STE-F and X12STD-F motherboards
Size 64GB 4X16GB
This 64 GB kit contains four 16 GB DDR4-3200 UDIMM modules rated at PC4-25600 with CL22 latency and 1.20 V operation. Each module is a 288-pin unbuffered ECC DIMM built with 1Rx8 organisation using major-brand Samsung, Micron or Hynix chips. The kit is validated for Supermicro X12STE-F and X12STD-F motherboards.
Builders populating Supermicro X12STE-F or X12STD-F boards with the exact rank, voltage and timing the memory controller expects will get full-capacity recognition at rated speed. Systems that require registered RDIMMs, SODIMM form factors, non-ECC memory or capacities beyond 64 GB cannot use this kit.
Error-correcting code detects and corrects single-bit errors continuously, preventing silent data corruption during long compute runs. Unbuffered topology keeps latency low at CL22 while the 1.20 V supply maintains stable operation without extra cooling. The 1Rx8 rank layout follows the board's population rules for consistent throughput over extended sessions.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR4 ECC Unbuffered UDIMM Memory |
| Part Number | ME25600-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR4 ECC UDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR4 ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB 4X16GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC UDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The motherboard and a compatible CPU are required; the kit itself contains four 288-pin DDR4-3200 ECC UDIMMs that plug directly into the board's memory slots with no extra hardware.
The board's memory-population rules determine whether mixed ranks and capacities are allowed; consult the Supermicro manual for the approved DIMM order before adding this 4×16 GB kit alongside existing modules.
Check the BIOS memory information screen or the operating system's memory report — both should show 64 GB total, 3200 MT/s speed, and ECC enabled.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?