NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR5 5600 CL46 2Rx8 1.1V UDIMM for GIGABYTE X870I AORUS PRO ICE memory upgrade
A 64 GB DDR5 kit with two 32 GB UDIMMs running at 5600 MT/s, CL46 and 1.1 V for the GIGABYTE X870I AORUS PRO ICE motherboard
- Capacity64GB (2 x 32GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB kit doubles capacity for demanding workloads
- DDR5 5600 MT/s transfers data at high bandwidth
- CL46 latency keeps response tight under load
- 1 V operation reduces power draw and heat
- 2Rx8 dual-rank layout maximises density per module
GIGABYTE X870I AORUS PRO ICE memory upgrade
This 64GB kit contains two 32GB DDR5 5600 CL46 modules built for the GIGABYTE X870I AORUS PRO ICE Mini-ITX motherboard. The 2Rx8 unbuffered UDIMMs run at 1.1V without a heat spreader. Buyers needing ECC or registered DIMMs should look elsewhere.
Thermals noise and power at 1.1V
Operating at the standard DDR5 voltage of 1.10V, the modules draw minimal power and produce little heat during typical desktop workloads. No heat spreader is fitted, so airflow from the CPU cooler or case fans passes directly over the DRAM. Silent operation is maintained under normal use.
Sustained load behaviour
The 2Rx8 organisation and CL46 latency deliver stable throughput during extended sessions such as compilation or rendering. Without a spreader, thermal headroom depends on case airflow rather than onboard dissipation. The kit is validated for continuous operation at the rated 5600 MT/s speed.
Highlights
- 64 GB kit doubles capacity for demanding workloads
- DDR5 5600 MT/s transfers data at high bandwidth
- CL46 latency keeps response tight under load
- 1 V operation reduces power draw and heat
- 2Rx8 dual-rank layout maximises density per module
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | GIGABYTE |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (2 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Questions about this item
How do I install the 288-pin DDR5 UDIMM modules into the GIGABYTE X870I AORUS PRO ICE motherboard, and what step is often missed?
Align the notch on each module with the slot key, press down firmly until both side clips click shut, then power on and enter the BIOS to confirm the kit runs at DDR5 5600 CL46 1.10V — many builders forget to verify the speed and latency after seating the sticks.
What maintenance or replacement will the 64GB (2 x 32GB) 2Rx8 kit need over its lifetime?
No scheduled maintenance is required; keep the slots dust-free and, if a module ever fails, replace it with an identical DDR5 5600 CL46 1.1V 2Rx8 UDIMM to preserve dual-channel operation.
What limit appears first when the memory runs sustained workloads at 5600 MT/s?
The CAS latency of CL46 at 1.1V is the primary timing constraint; the memory controller will throttle bandwidth before temperature becomes an issue because the modules have no heat spreader.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



