NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR5 4800 CL40 2Rx8 SODIMM Laptop Kit X13SAV-LVDS Mini-ITX Embedded memory upgrade
64 GB dual-channel DDR5 4800 kit with two 32 GB SODIMM modules built for the Supermicro X13SAV-LVDS Mini-ITX embedded board
- Capacity64GB (2 x 32GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB capacity across two 32 GB modules
- DDR5 4800 speed with CL40 latency
- 1 V low-voltage operation reduces power draw
- 262-pin SODIMM form factor fits laptop slots
- Validated for SuperMicro X13SAV-LVDS Mini-ITX embedded board
System-Specific DDR5 SODIMM Kit
This NEMIX RAM kit provides 64 GB of DDR5 memory in two 32 GB modules. It is built for the Supermicro X13SAV-LVDS Mini-ITX embedded motherboard. The modules run at 4800 MHz with a CAS latency of CL40 and operate at 1.1 V. They use a 262-pin SODIMM form factor with a 2Rx8 rank configuration.
Suited for Embedded Upgrades
This memory suits technicians upgrading the specified Supermicro platform to its maximum supported capacity with matched modules. It is not for buyers needing ECC error correction or registered signal buffering. It is also not for anyone repairing a laptop or board that requires a different pin count, voltage, or DDR generation.
262-Pin DDR5 SODIMM Interface
The decisive specification is the 262-pin DDR5 SODIMM interface combined with 1.1 V operation. Only systems designed for this exact physical and electrical standard will accept the modules. Verify the motherboard manual calls for DDR5 SODIMM non-ECC unbuffered memory before purchasing.
Highlights
- 64 GB capacity across two 32 GB modules
- DDR5 4800 speed with CL40 latency
- 1 V low-voltage operation reduces power draw
- 262-pin SODIMM form factor fits laptop slots
- Validated for SuperMicro X13SAV-LVDS Mini-ITX embedded board
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered SODIMM Memory |
| Part Number | MS38400-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 262-Pin DDR5 SODIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 64GB (2 x 32GB) DDR5 4800MHz PC5-38400 2Rx8 1.1V 262-PIN Non-ECC SODIMM KIT |
Questions about this item
Will these 262-pin DDR5 SODIMM modules fit the SO-DIMM slots on the SuperMicro X13SAV-LVDS Mini-ITX Embedded motherboard?
Yes, the kit uses the 262-pin DDR5 SODIMM form factor that matches the slots on the X13SAV-LVDS board.
What is the correct way to seat the two 32 GB modules so the board recognises the full 64 GB capacity?
Insert each module at a slight angle into the slot, then press down firmly until the side retention clips click into place on both sides.
Do the Samsung, Micron or Hynix chips on these modules require any firmware updates or periodic reseating over time?
No, the memory is a solid-state component with no moving parts and does not need firmware updates or scheduled reseating.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



