We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, no heat spreader, 260-pin SODIMM edge connector

NEMIX RAM

NEMIX RAM 4GB DDR4 2666MHz CL19 1.2V 260-pin SODIMM QNAP NAS memory upgrade

SKU CH-96AB-RA9Z5

4GB DDR4 2666MHz CL19 SODIMM module adds 4GB of 1.2V memory to compatible QNAP NAS systems

  • Capacity4GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 4GB capacity expands NAS storage headroom
  • DDR4 2666MHz speed matches QNAP system requirements
  • CL19 latency at 1.2V ensures stable operation
  • 260-pin SODIMM form factor fits QNAP NAS slots
  • Major OEM chips deliver enterprise-grade reliability

QNAP NAS DDR4 2666 SODIMM

This 4 GB DDR4 module runs at 2666 MT/s with CL19 latency and 1.2 V operation. It is built as a 1Rx8 unbuffered non-ECC SODIMM using major OEM DRAM from Samsung Micron or Hynix. The part number MS21300-418K1 identifies the QNAP compatible series.

260-pin SODIMM slot requirement

The stick fits a single 260-pin DDR4 SODIMM slot in supported QNAP NAS units. No heat spreader is fitted so the low-profile design clears tight drive cages and chassis airflow paths. Installation follows the NAS owner’s manual and typically takes minutes.

Single module package content

The box contains one 4 GB DDR4 2666 SODIMM and nothing else. No extra cables brackets or software discs are included. The module is stress tested under load before shipping to verify stability in mission critical environments.

Highlights

  • 4GB capacity expands NAS storage headroom
  • DDR4 2666MHz speed matches QNAP system requirements
  • CL19 latency at 1.2V ensures stable operation
  • 260-pin SODIMM form factor fits QNAP NAS slots
  • Major OEM chips deliver enterprise-grade reliability

Specifications

BrandNEMIX RAM
SeriesQNAP NAS Compatible Series Memory
ModelQNAP DDR4 2666MHZ Non-ECC Unbuffered SODIMM NAS Memory
Part NumberMS21300-418K1
Capacity4GB
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemQnap
CAS LatencyCL19
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

What CAS latency does this module run at under continuous load?

The module operates at CL19 CAS latency, which remains constant during sustained use as it is a fixed timing parameter of the DDR4 2666 specification.

How much heat does this SODIMM generate when running all day in a NAS?

Without a heat spreader, the 1.20V DDR4 chips rely on case airflow; power draw stays at the standard DDR4 low-voltage level so additional cooling is rarely needed in a ventilated NAS chassis.

Which QNAP NAS models accept this 260-pin DDR4 SODIMM?

Compatibility is limited to QNAP systems that support DDR4 2666 unbuffered non-ECC SODIMMs; consult your NAS manual to confirm the slot type and maximum capacity before purchase.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.