We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR4 SODIMM module with gold contacts and black chips

NEMIX RAM

NEMIX RAM 4GB DDR4 2400 CL17 1.2V 260-pin SODIMM HMA851S6CFR6N-UH

SKU CH-8Q5V-A1FBP

4 GB DDR4 laptop SODIMM running at 2400 MT/s with CL17 latency and 1.2 V operation

  • Capacity4GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCNo
  • 4 GB DDR4 2400 MT/s adds responsive multitasking capacity
  • CL17 latency at 1.20 V keeps power draw low for mobile use
  • 260-pin SODIMM form factor fits laptops, AIOs, SFF PCs and NAS units
  • Non-ECC unbuffered design suits mainstream consumer and small-business systems
  • Rigorously stress-tested modules deliver reliable operation under sustained workloads

4GB DDR4 SODIMM for Laptop Upgrades

This NEMIX RAM module adds four gigabytes of DDR4 memory to laptops, all-in-one PCs, small-form-factor systems and NAS devices. It is built for owners who need a straightforward capacity increase without changing voltage or form factor.

DDR4 2400 CL17 1.2V 260-pin specification

The decisive figure is the DDR4 2400 speed with CL17 latency at 1.20 volts on a 260-pin SO-DIMM. Only systems that accept PC4-19200 unbuffered non-ECC modules at this exact voltage and pin count will recognise the stick.

No heat spreader or bundled software

The module ships without a heat spreader, keeping the profile low for tight chassis. No software, drivers or additional accessories are included; the upgrade is complete once the module is seated in the slot.

Highlights

  • 4 GB DDR4 2400 MT/s adds responsive multitasking capacity
  • CL17 latency at 1.20 V keeps power draw low for mobile use
  • 260-pin SODIMM form factor fits laptops, AIOs, SFF PCs and NAS units
  • Non-ECC unbuffered design suits mainstream consumer and small-business systems
  • Rigorously stress-tested modules deliver reliable operation under sustained workloads

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Series 260-Pin NON-ECC Unbuffered SODIMM Memory
ModelDDR4 NON-ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory
Part NumberMS19200-416K1
Capacity4GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesDDR4 Laptop, AIO All-in-One, SFF, NAS Device Compatible

Questions about this item

Will the CL17 timing make a noticeable difference in everyday laptop use?

CL17 is the standard latency for DDR4 2400 modules. The system will run at this timing automatically, and typical office or web workloads will not feel slower than a lower-latency stick at the same speed.

Does the PC4-19200 rating limit the bandwidth I actually get?

PC4-19200 is the peak transfer rate for DDR4 2400. The memory controller in your laptop or AIO caps real-world throughput, so sustained bandwidth will be somewhat lower than the theoretical maximum.

Will this 260-pin SODIMM fit in my small-form-factor desktop or NAS?

Yes. The module uses the standard 260-pin DDR4 SO-DIMM form factor used in laptops, all-in-one PCs, SFF systems and many NAS devices that accept SODIMM memory.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.