We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 4GB DDR3 1866 PC3-14900 CL13 1.50V 204-Pin SODIMM laptop RAM

SKU CH-VH7V-1HD3E

4 GB DDR3 SODIMM running at 1866 MHz with CL13 latency for laptop upgrades

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCNo
  • 4 GB capacity expands multitasking headroom for everyday workloads
  • DDR3 1866 speed with CL13 latency delivers responsive data access
  • 50 V operation matches standard laptop power requirements
  • 204-pin SODIMM form factor fits compatible notebook and AIO slots
  • Non-ECC unbuffered design suits consumer laptop and NAS upgrades

4 GB DDR3 SODIMM for laptops

This NEMIX RAM module provides four gigabytes of DDR3 memory in a 204-pin SODIMM form factor. It runs at 1866 MHz with a CAS latency of 13 and operates at 1.50 V. The unbuffered, non-ECC design targets standard laptop, all-in-one, small-form-factor and NAS devices.

Suits DDR3 systems needing a single 4 GB stick

The module fits owners of compatible DDR3 platforms looking to add or replace one 4 GB SODIMM. It will not work in systems that require ECC memory, registered modules, or a different pin count. Buyers needing higher capacities, lower voltages, or faster DDR3 speeds should consider other specifications.

1.50 V operating voltage is the deciding spec

Your platform must accept 1.50 V DDR3 SODIMMs; some chipsets only support 1.35 V low-voltage modules and will not boot with this stick. Verify the voltage requirement in the system manual or current memory label before ordering.

Highlights

  • 4 GB capacity expands multitasking headroom for everyday workloads
  • DDR3 1866 speed with CL13 latency delivers responsive data access
  • 50 V operation matches standard laptop power requirements
  • 204-pin SODIMM form factor fits compatible notebook and AIO slots
  • Non-ECC unbuffered design suits consumer laptop and NAS upgrades

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Series 204-Pin NON-ECC Unbuffered SODIMM Memory
ModelDDR3 NON- ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory
Part NumberMS14900-428K1
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesDDR3 Laptop, AIO All-in-One, SFF, NAS Device Compatible

Questions about this item

Does my laptop need a 204-pin DDR3 SO-DIMM slot to use this module?

Yes, it installs in a standard 204-pin DDR3 SO-DIMM socket found in compatible laptops, all-in-one PCs, small-form-factor desktops and NAS devices.

Will this CL13 1866 MHz stick run reliably alongside slower DDR3 modules already in my system?

The memory will downclock to match the speed and latency of the slowest installed module so the system remains stable.

How can I confirm the module is running at PC3-14900 with CL13 after installation?

Open Task Manager or a hardware utility such as CPU-Z and verify the reported speed shows 1866 MHz and CAS latency 13.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.