We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 4GB DDR3 1333MHz 1.35V 204-Pin SODIMM POSIFLEX TK-2131 memory upgrade

SKU CH-J9VG-WKFMT

A 4 GB DDR3 SODIMM rated at 1333 MHz and 1.35 V for the POSIFLEX TK-2131 kiosk

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX TK-2131 kiosk systems
  • DDR3 1333 MHz speed supports responsive operation
  • Low 1.35 V voltage reduces power draw
  • 204-pin SODIMM form factor fits the slot
  • CL9 latency with 2Rx8 organisation enables stable throughput

System-Specific DDR3 SODIMM for POSIFLEX Kiosk

This 4GB DDR3 module is built for the POSIFLEX TK-2131 Stellar Series kiosk. It runs at 1333MHz with a CL9 latency and operates at 1.35V. The 204-pin unbuffered SODIMM uses major OEM chips from Samsung, Micron or Hynix and is tested for compatibility with the target system.

Suits technicians upgrading a single POSIFLEX

This memory fits only the specified kiosk model and similar POSIFLEX POS systems requiring DDR3 1333MHz SODIMMs. It is not for desktop PCs, laptops or servers using DIMM form factors or different DDR generations. Buyers needing ECC, registered modules, higher capacities or faster speeds must select a different part.

Single stick simplifies slot management

The package contains one 4GB SODIMM, allowing a straightforward drop-in upgrade without pairing requirements. No heat spreader is included, keeping the low profile needed for compact kiosk chassis. The module is validated for the POSIFLEX platform to ensure stable operation in point-of-sale environments.

Highlights

  • Designed for POSIFLEX TK-2131 kiosk systems
  • DDR3 1333 MHz speed supports responsive operation
  • Low 1.35 V voltage reduces power draw
  • 204-pin SODIMM form factor fits the slot
  • CL9 latency with 2Rx8 organisation enables stable throughput

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

What motherboard slot does the 204-pin SODIMM fit?

The module installs in a standard DDR3 SODIMM socket that accepts 204-pin modules running at 1333 MHz and 1.35 V.

Will the 1.35 V module run with existing 1.50 V DDR3 sticks?

Yes — the system will operate all modules at the higher 1.50 V level, so the new stick works alongside older 1.50 V memory.

How can I confirm the stick is detected at PC3-10600 speed?

Check the BIOS memory summary or a tool such as CPU-Z; it should show 4 GB, DDR3, 1333 MHz, CL9 timing.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.