NEMIX RAM
NEMIX RAM 4GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM POSIFLEX PS-3516Q memory upgrade
4GB DDR3 1333 SODIMM module tested for POSIFLEX PS-3516Q point-of-sale terminals
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX PS-3516Q terminal
- DDR3 1333 speed for responsive operation
- Low 1.35V voltage reduces power draw
- 204-pin SODIMM fits compatible slots directly
- 2Rx8 organisation supports stable multitasking
POS terminal memory upgrade
This 4 GB DDR3 SODIMM is built for the POSIFLEX PS-3516Q point-of-sale terminal. It delivers 1333 MHz speed with CL9 latency and 2Rx8 organisation in a 204-pin form factor. The module is non-ECC, unbuffered and runs at 1.35 V low voltage.
Straightforward SODIMM installation
The stick slots into the terminal’s memory socket without tools and is keyed to prevent misalignment. Because the system is fanless, ensure the module is fully seated before closing the chassis to avoid intermittent contact. No BIOS configuration is required beyond standard SPD detection.
Steady operation in fanless environments
Rated at 1.35 V with major OEM chips from Samsung, Micron or Hynix, the module maintains stable throughput during continuous transaction processing. The low-voltage design reduces thermal load inside the sealed enclosure, helping the terminal sustain performance over long shifts without throttling.
Highlights
- Designed for POSIFLEX PS-3516Q terminal
- DDR3 1333 speed for responsive operation
- Low 1.35V voltage reduces power draw
- 204-pin SODIMM fits compatible slots directly
- 2Rx8 organisation supports stable multitasking
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Questions about this item
How do I verify the module runs at DDR3 1333 CL9 after installing it in the POSIFLEX PS-3516Q?
Enter the BIOS or use a system-info tool such as CPU-Z; the memory tab should show 1333 MHz, PC3-10600 and CL9 timings, confirming the rated speed and latency.
What comes in the package and do I need any extra parts for the POSIFLEX PS-3516Q?
The box contains one 4 GB 204-pin DDR3 SODIMM (part MS10600-428K1). No additional memory parts are required; the terminal has a single SODIMM slot that this module fills.
Which capacity should I choose if the POSIFLEX PS-3516Q only accepts one SODIMM?
This 4 GB module is the only capacity listed for the PS-3516Q in this series, so it is the correct choice for a single-slot upgrade.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
$174.99
0.00210269BTC
In stock
minisforum
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
$6.99
0.00008399BTC
In stock