NEMIX RAM
NEMIX RAM 4GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM for POSIFLEX HC-1021 memory upgrade
4 GB DDR3 1333 SODIMM for POSIFLEX HC-1021 terminal, 2Rx8 CL9 unbuffered
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- 4GB DDR3 1333 memory boosts POS terminal responsiveness
- 35V low-voltage module reduces power draw in kiosk hardware
- 204-pin SODIMM fits POSIFLEX HC-1021 21.5-inch touch screen
- Major OEM Samsung Micron Hynix chips deliver tested reliability
- CL9 CAS latency supports smooth transaction processing
System-specific SODIMM for POS terminals
This 4 GB DDR3 SODIMM is built for the POSIFLEX HC-1021 21.5-inch touch-screen infotainment terminal. It delivers 1333 MHz speed at CL9 latency in a 204-pin unbuffered non-ECC form factor. The module uses major-brand Samsung, Micron or Hynix chips and operates at 1.35 V.
Replaces original HC-1021 memory
Upgrading from the factory-fitted module is worthwhile when the terminal runs multiple POS applications simultaneously and shows sluggish response. The 2Rx8 organisation provides dual-rank density that the original single-rank stick may lack. No BIOS change is required for this direct replacement.
Handles typical POS workloads
The 4 GB capacity comfortably runs Windows Embedded or Linux-based POS suites with local databases and peripheral drivers. Headroom becomes tight when background analytics, digital-signage overlays or virtualised instances are added. For heavier multi-tasking the system would need additional slots or higher-density modules.
Highlights
- 4GB DDR3 1333 memory boosts POS terminal responsiveness
- 35V low-voltage module reduces power draw in kiosk hardware
- 204-pin SODIMM fits POSIFLEX HC-1021 21.5-inch touch screen
- Major OEM Samsung Micron Hynix chips deliver tested reliability
- CL9 CAS latency supports smooth transaction processing
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Questions about this item
What slot does the 204-pin SODIMM fit in the POSIFLEX HC-1021?
It installs directly into the DDR3 SODIMM slot on the POSIFLEX HC-1021 motherboard.
How do I install the module and what step is often missed?
Power off the terminal, open the memory cover, align the notch on the module with the slot key, insert fully, then press down until the retaining clips lock automatically.
Will this 4 GB DDR3 module need replacement during the terminal's life?
The module has no moving parts and requires no scheduled maintenance; it only needs replacement if a fault develops or capacity must be increased.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
$174.99
0.00210507BTC
In stock
minisforum
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
$6.99
0.00008409BTC
In stock