NEMIX RAM
NEMIX RAM 48GB DDR5 5600 CL46 1.1V 2Rx8 288-Pin UDIMM memory upgrade for ASRock Rack W680D4U-2L2T/G5
A 48 GB DDR5 UDIMM running at 5600 MT/s with CL46 latency and 1.1 V operation, validated for the ASRock Rack W680D4U-2L2T/G5 motherboard
- Capacity48GB
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 48 GB capacity expands multitasking headroom for demanding workloads
- DDR5 5600 speed delivers high bandwidth for data-intensive applications
- CL46 latency supports responsive system performance at rated frequency
- 1 V operation reduces power draw compared to higher-voltage modules
- 288-pin UDIMM form factor fits the ASRock Rack W680D4U-2L2T/G5 motherboard
48GB DDR5 UDIMM for ASRock Rack W680D4U
This 48GB DDR5 5600 module is built for the ASRock Rack W680D4U-2L2T/G5 motherboard. It uses a single 288-pin UDIMM running at 1.1V with CL46 latency. The 2Rx8 rank layout suits workstations and servers needing maximum capacity per slot. Buyers who want ECC protection or registered buffering should look elsewhere.
Replaces slower DDR5 or smaller DDR5 modules
Upgrading from lower-speed DDR5 or smaller-capacity sticks yields higher bandwidth and more headroom for multi-threaded workloads. The jump is worth it when your board supports DDR5 5600 and you need 48GB in one slot. Systems locked to lower DDR5 speeds or limited to smaller DIMMs will not benefit.
Check motherboard slot count and BIOS revision
Verify the W680D4U-2L2T/G5 has a free 288-pin DDR5 UDIMM slot and that the BIOS recognises 48GB 2Rx8 non-ECC modules at 5600 MT/s. Confirm the platform accepts 1.1V operation without manual voltage changes. Buyers with boards restricted to registered or ECC memory cannot use this kit.
Highlights
- 48 GB capacity expands multitasking headroom for demanding workloads
- DDR5 5600 speed delivers high bandwidth for data-intensive applications
- CL46 latency supports responsive system performance at rated frequency
- 1 V operation reduces power draw compared to higher-voltage modules
- 288-pin UDIMM form factor fits the ASRock Rack W680D4U-2L2T/G5 motherboard
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-4828K1 |
| Capacity | 48GB |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 48GB (1 x 48GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM |
Questions about this item
Will the 288-pin DDR5 UDIMM fit the ASRock Rack W680D4U-2L2T/G5 motherboard slots?
Yes, the module uses the standard 288-pin DDR5 UDIMM form factor that matches the DIMM slots on the ASRock Rack W680D4U-2L2T/G5 board.
What BIOS step is often missed when installing this 5600 CL46 1.10V DDR5 module?
After seating the DIMM, enter the BIOS and confirm the memory runs at DDR5 5600 with CL46 timings at 1.10V; some boards default to a lower speed until XMP or the equivalent profile is enabled.
Does the 48GB 2Rx8 stick need any periodic cleaning or component replacement?
No scheduled maintenance is required; the module has no heat spreader or moving parts, so only occasional dust removal from the slot area is needed.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



