We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, no heat spreader, 288 gold pins along bottom edge

NEMIX RAM

NEMIX RAM 32GB DDR5 5600 CL46 1.1V 2Rx8 288-Pin UDIMM for ASRock IMB-1316 memory upgrade

SKU CH-8FME-Z838Y

32 GB DDR5 5600 CL46 1.1 V 2Rx8 UDIMM for ASRock IMB-1316 industrial motherboards

  • Capacity32GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB capacity expands system memory for demanding workloads
  • DDR5 5600 speed delivers high bandwidth for data-intensive tasks
  • CL46 latency supports responsive operation at rated frequency
  • 1 V operation reduces power draw and heat output
  • Validated for ASRock IMB-1316 series industrial motherboards

32GB DDR5 5600 module for ASRock IMB-1316

This 32GB DDR5 5600 UDIMM is built for the ASRock Industrial IMB-1316 series micro-ATX motherboards. It targets system integrators and IT teams who need a single-slot capacity upgrade on those specific boards. The module runs at 1.1V with CL46 latency and uses a 2Rx8 organisation.

Capacity headroom at 5600 MT/s

One 32GB stick fills a single DDR5 slot and delivers PC5-44800 bandwidth for multi-threaded workloads and virtual machines. The 2Rx8 density helps throughput, but the CL46 timing limits peak responsiveness in latency-sensitive tasks. Systems needing more than 32GB total will require additional slots.

Non-ECC unbuffered fit for industrial boards

The 288-pin UDIMM drops straight into the IMB-1316, IMB-X1316 and IMB-X1316-10G without ECC or registered signalling. No heat spreader is fitted, so airflow across the motherboard must handle thermals. Builders needing ECC error correction or registered modules cannot use this part.

Highlights

  • 32 GB capacity expands system memory for demanding workloads
  • DDR5 5600 speed delivers high bandwidth for data-intensive tasks
  • CL46 latency supports responsive operation at rated frequency
  • 1 V operation reduces power draw and heat output
  • Validated for ASRock IMB-1316 series industrial motherboards

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-328K1
Capacity32GB
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemASRock Industrial
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM

Questions about this item

Will this 32GB DDR5 5600 CL46 module run with any existing DDR5 DIMMs I keep in my ASRock IMB-1316 board?

The module is DDR5 5600 PC5-44800 CL46 1.10V 2Rx8 unbuffered non-ECC; matching speed, voltage, rank and ECC type gives the best chance of stable operation alongside other DDR5 sticks.

How can I confirm the 32GB DDR5 5600 stick is detected at its rated speed after installation?

Enter the system BIOS or UEFI and check the memory information screen — it should show 32GB, DDR5 5600 MT/s, CL46 timings and 1.10V.

What comes in the box and is anything else needed to install the 32GB DDR5 5600 UDIMM?

The package contains one 32GB 288-pin DDR5 UDIMM; no heat spreader or extra cables are included and no separate parts are required for installation.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.