NEMIX RAM
NEMIX RAM 32GB DDR4 3200 CL22 2Rx8 1.2V 260-Pin SODIMM for QNAP TVS-h874T
32GB DDR4 3200 CL22 2Rx8 ECC SODIMM module built for QNAP TVS-h874T NAS
- Capacity32GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB capacity expands NAS storage for demanding workloads
- DDR4 3200 speed accelerates data throughput in QNAP TVS-h874T
- CL22 latency maintains responsive operation under load
- 2 V operation reduces power draw and heat output
- 260-pin SODIMM form factor fits directly into compatible QNAP NAS slots
32GB DDR4 3200 SODIMM for QNAP NAS
This 32GB DDR4 3200 module is built for the QNAP TVS-h874T NAS. It runs at 1.2V with CL22 timing in a 260-pin SODIMM form factor. The stick uses major OEM chips and is unbuffered non-ECC. It adds a single 32GB rank to compatible QNAP systems.
Best for single-slot upgrades on TVS-h874T
This module suits owners of the TVS-h874T who need one 32GB stick to fill an empty slot or replace a smaller module. Buyers who want ECC error correction or registered buffering should look elsewhere. Systems that require a different voltage, pin count or form factor cannot use this memory.
Fits TVS-h874T SODIMM slots directly
The SODIMM inserts into the TVS-h874T memory slot without adapters. Its 1.2V operation matches the platform's standard voltage. Using major OEM chips helps maintain stability under sustained NAS workloads. The unbuffered design keeps latency low for the supported system.
Highlights
- 32 GB capacity expands NAS storage for demanding workloads
- DDR4 3200 speed accelerates data throughput in QNAP TVS-h874T
- CL22 latency maintains responsive operation under load
- 2 V operation reduces power draw and heat output
- 260-pin SODIMM form factor fits directly into compatible QNAP NAS slots
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | QNAP NAS Compatible Series Memory |
| Model | QNAP DDR4 3200MHZ Non-ECC Unbuffered SODIMM NAS Memory |
| Part Number | MS25600-328K1 |
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Qnap |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN ECC Unbuffered SODIMM |
Questions about this item
Does the QNAP TVS-h874T need any specific BIOS setting or firmware version to recognise this 32GB DDR4 3200 CL22 SODIMM?
The module is built to JEDEC DDR4 3200 PC4-25600 at 1.20V with CL22 timing, so the NAS will detect it automatically on standard firmware.
Can I run this 32GB stick in the same TVS-h874T alongside modules that operate at a lower DDR4 speed?
The system will run all installed memory at the speed of the slowest module, so this 3200MHz stick will down-clock to match older DDR4 SODIMMs.
How can I confirm the NAS is using the full 32GB at 3200MHz after installing this 2Rx8 SODIMM?
Open the QNAP Control Panel, go to System > Hardware, and verify the memory line shows 32GB DDR4 3200 with the correct capacity.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



