NEMIX RAM
NEMIX RAM 32GB DDR4 2933 PC4-23400 CL21 1.2V 2Rx8 288-Pin UDIMM Samsung M378A4G43AB1-CVF memory upgrade
A 32 GB DDR4-2933 UDIMM module rated CL21 at 1.2 V for Samsung desktop systems
- Capacity32GB
- SpeedDDR4 2933 (PC4 23400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32GB capacity expands multitasking headroom for demanding workloads
- DDR4 2933 speed transfers data at PC4-23400 rates
- CL21 latency keeps response tight under load
- 2V operation reduces power draw and heat
- 2Rx8 dual-rank layout maximises density per slot
Capacity and Compatibility
This 32GB DDR4 module is built for desktop systems that require Samsung-compatible memory. It installs in a single 288-pin UDIMM slot and delivers 2933 MT/s speed with CL21 latency. The unbuffered, non-ECC design suits standard consumer motherboards rather than server platforms. Buyers who need ECC error correction or registered buffering should choose a different module.
Thermals and Power
Operating at 1.2V, the stick draws minimal power and runs without a heat spreader. Passive cooling relies on case airflow, so temperatures stay low during typical office workloads and light multitasking. Silent operation is assured because no fan or active component is present. Builders who prefer heatsink-equipped modules for aesthetic reasons will not find one here.
Sustained Load Behaviour
Under continuous heavy use the memory maintains its rated 2933 MT/s frequency and CL21 timings. Samsung-sourced ICs are stress-tested by the supplier to verify stability over extended periods. The dual-rank 2Rx8 organisation helps sustain bandwidth during prolonged compute tasks. Systems that demand higher frequencies or lower latencies for all-day rendering will need faster-rated kits.
Highlights
- 32GB capacity expands multitasking headroom for demanding workloads
- DDR4 2933 speed transfers data at PC4-23400 rates
- CL21 latency keeps response tight under load
- 2V operation reduces power draw and heat
- 2Rx8 dual-rank layout maximises density per slot
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | Samsung Desktop PC Compatible Series Memory |
| Model | Samsung DDR4 288-Pin Non-ECC Unbuffered UDIMM |
| Part Number | MD23400-328K1 |
| Capacity | 32GB |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Samsung |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM |
Questions about this item
How do I install this 288-pin DDR4 UDIMM and which step do people often get wrong?
Align the notch on the module with the key in the motherboard slot, press down firmly until both side clips snap shut, and verify the system reports 32 GB at 2933 MT/s; the step most often missed is seating the module fully so both clips engage automatically.
What maintenance or replacement will this 32 GB module need later?
No routine maintenance is required; keep the slot and contacts free of dust, and if the system ever fails to POST or shows memory errors, replace the module under its lifetime replacement coverage.
What limit appears first when this CL21 1.2 V kit runs under sustained load?
The CAS latency of 21 cycles at 2933 MT/s sets the timing floor, so sustained workloads will hit latency-bound throughput before voltage or thermal limits become a factor.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
$174.99
0.00210831BTC
In stock
minisforum
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
$6.99
0.00008422BTC
In stock