NEMIX RAM
NEMIX RAM 32GB DDR4 2666 CL19 2Rx8 1.2V 260-pin SODIMM for QNAP TVS-H674T TVS-H874T memory upgrade
A 32 GB DDR4 SODIMM running at 2666 MHz with CL19 latency and 1.2 V operation for QNAP TVS-H674T and TVS-H874T NAS upgrades
- Capacity32GB
- SpeedDDR4 2666 (PC4 21300)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB capacity expands NAS storage for demanding workloads
- DDR4 2666 speed matches QNAP TVS-H674T and TVS-H874T specifications
- CL19 latency at 1.2 V delivers efficient data access
- 2Rx8 rank on 260-pin SODIMM fits compatible QNAP bays
- Major OEM chips from Samsung Micron Hynix ensure module reliability
System-specific SODIMM for QNAP NAS
This 32GB DDR4 2666 module is built for QNAP TVS-H674T and TVS-H874T systems. It uses a 260-pin SODIMM form factor with CL19 latency and 1.2V operation. The single stick adds capacity without occupying multiple slots.
Passive cooling and standard power draw
No heat spreader is fitted, so the module relies on chassis airflow for cooling. Unbuffered non-ECC DRAM at 1.20V keeps power consumption low during typical NAS workloads. Silent operation is assured with no moving parts.
2Rx8 organisation on a single 32GB stick
The dual-rank 2Rx8 layout delivers 32GB in one module using major OEM chips from Samsung, Micron or Hynix. Systems limited to one SODIMM slot can reach full capacity. Buyers needing ECC error correction or registered buffering must choose a different part.
Highlights
- 32 GB capacity expands NAS storage for demanding workloads
- DDR4 2666 speed matches QNAP TVS-H674T and TVS-H874T specifications
- CL19 latency at 1.2 V delivers efficient data access
- 2Rx8 rank on 260-pin SODIMM fits compatible QNAP bays
- Major OEM chips from Samsung Micron Hynix ensure module reliability
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | QNAP NAS Compatible Series Memory |
| Model | QNAP DDR4 2666MHZ Non-ECC Unbuffered SODIMM NAS Memory |
| Part Number | MS21300-328K1 |
| Capacity | 32GB |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Qnap |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM |
Questions about this item
How do I install the 260-pin SODIMM in my QNAP TVS-H674T and what step is often missed?
Power off the NAS, remove the chassis cover, insert the module at an angle until the gold contacts are hidden, then press down until the side clips click — the step often missed is fully seating both clips so the 1.20 V module makes solid contact.
What maintenance or replacement will this 32 GB DDR4 2666 CL19 module need later?
No scheduled maintenance is required; the unbuffered non-ECC SODIMM has no heat spreader or moving parts, so only a future capacity upgrade or a confirmed memory fault would prompt replacement.
What limit appears first when the NAS runs sustained workloads with this CL19 2Rx8 kit?
The CAS latency of 19 cycles at 2666 MT/s sets the timing floor, so latency-sensitive tasks hit that timing ceiling before the 1.2 V power envelope or the 2Rx8 rank structure becomes a bottleneck.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



