NEMIX RAM
NEMIX RAM 32GB (4×8GB) DDR4 2400 CL17 260-PIN SODIMM QNAP TVS-673 TVS-873 memory upgrade
32 GB DDR4 SODIMM kit adds 2400 MHz memory to QNAP TVS-673 and TVS-873 NAS units
- Capacity32GB (4 x 8GB)
- SpeedDDR4 2400 (PC4 19200)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB kit expands NAS capacity for heavy workloads
- Four 8 GB modules fill all slots on TVS-673 and TVS-873
- DDR4 2400 CL17 timing matches factory spec
- 2 V operation keeps power draw low
- Major-brand DRAM chips validated for 24/7 reliability
32GB DDR4 SODIMM kit for QNAP TVS-673 and TVS-873
This kit supplies 32GB of DDR4 2400 memory across four 8GB modules. It targets owners of the listed QNAP NAS models who need to reach the maximum supported capacity. The non-ECC unbuffered design matches the platform's memory controller requirements.
260-pin unbuffered modules without heat spreaders
Each stick uses a standard 260-pin SODIMM form factor and runs at 1.20V. The low-profile build fits tight NAS slots without clearance issues. Major OEM chips from Samsung, Micron or Hynix are used depending on production batch.
DDR4 2400 CL17 limits bandwidth to PC4-19200
The JEDEC-standard 2400 MT/s rate and CL17 latency set the throughput ceiling for this platform. Builders who need higher memory speeds or ECC error correction must choose a different NAS model that supports those features.
Highlights
- 32 GB kit expands NAS capacity for heavy workloads
- Four 8 GB modules fill all slots on TVS-673 and TVS-873
- DDR4 2400 CL17 timing matches factory spec
- 2 V operation keeps power draw low
- Major-brand DRAM chips validated for 24/7 reliability
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | QNAP NAS Compatible Series Memory |
| Model | QNAP DDR4 2400MHZ Non-ECC Unbuffered SODIMM NAS Memory |
| Part Number | MS19200-818K4 |
| Capacity | 32GB (4 x 8GB) |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Qnap |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 260-PIN DDR4 SODIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (4X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM NAS Memory KIT |
Questions about this item
What DDR4 standard and speed does this 260-pin SODIMM kit use?
The kit runs at DDR4 2400, also marked as PC4-19200, with a CAS latency of CL17 and operates at 1.2 V.
What physical slot and module count are required for the TVS-673 and TVS-873?
Each module is a 260-pin DDR4 SODIMM; the kit includes four 8 GB sticks to fill the four slots in the TVS-673 or TVS-873.
How is the memory installed and which step is often missed?
Power off the NAS, remove the chassis cover, insert each SODIMM at an angle until the gold contacts disappear, then press down until the side clips click. People often forget to seat both clips fully.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



