NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 UDIMM ASUS ProArt Z890-CREATOR WiFi
32GB dual-channel DDR5 5600 kit with CL46 latency, 1.1V operation and 288-pin unbuffered design validated for the ASUS ProArt Z890-CREATOR WiFi motherboard
- Capacity32GB (2 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB kit (2 × 16 GB) expands desktop capacity
- DDR5 5600 speed (PC5-44800) raises data throughput
- CL46 CAS latency at 1.1 V reduces access delay
- 288-pin UDIMM form factor fits ASUS ProArt Z890-CREATOR WiFi board
- Major OEM Samsung, Micron, Hynix chips ensure module reliability
System-Specific DDR5 Kit
This NEMIX RAM kit delivers 32 GB of DDR5 memory in a matched pair of 16 GB modules. It is built for the ASUS ProArt Z890-CREATOR WiFi motherboard and runs at 5600 MHz with a CAS latency of CL46. The unbuffered, non-ECC UDIMMs operate at 1.10 V using major-brand DRAM chips.
Ideal for ProArt Builders
The kit suits creators and professionals assembling or upgrading the named ProArt board who need reliable, validated capacity. It is not for systems that require registered or ECC memory, nor for platforms limited to earlier DDR generations. Buyers needing more than two modules should verify the board’s slot count before ordering.
Decisive Spec — 5600 MHz CL46 at 1.10 V
The rated speed, latency and voltage combination determines whether the memory meets the motherboard’s qualified-vendor list. If your build demands a different frequency or tighter timings, this kit will not match those requirements.
Highlights
- 32 GB kit (2 × 16 GB) expands desktop capacity
- DDR5 5600 speed (PC5-44800) raises data throughput
- CL46 CAS latency at 1.1 V reduces access delay
- 288-pin UDIMM form factor fits ASUS ProArt Z890-CREATOR WiFi board
- Major OEM Samsung, Micron, Hynix chips ensure module reliability
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASUS |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Questions about this item
What CAS latency will I see when the kit runs at its rated DDR5 5600 speed?
The modules are specified at CL46 when operating at DDR5 5600 (PC5-44800).
How much heat and power should I expect from these sticks during all-day workloads?
They run at 1.10 V with no heat spreader, so power draw and heat output stay low for standard desktop use.
Which motherboard slot layout do I need to have free for this 2 x 16 GB kit?
Two adjacent 288-pin DDR5 UDIMM slots are required to install the pair.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
$174.99
0.00208344BTC
In stock
minisforum
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
$6.99
0.00008322BTC
In stock