NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 1.1V UDIMM for ASRock Rack W680D4U-2L2T/G5 memory upgrade
A 32 GB dual-channel DDR5 kit running at 5600 MT/s with CL46 latency and 1.1 V operation for the ASRock Rack W680D4U-2L2T/G5
- Capacity32GB (2 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB total capacity from two 16 GB modules
- DDR5 5600 speed with PC5-44800 bandwidth rating
- Low 1.10 V operation reduces power draw
- CL46 CAS latency for responsive timing
- Validated for ASRock Rack W680D4U-2L2T/G5 motherboard
32GB DDR5 kit for ASRock Rack W680D4U-2L2T/G5
This 32GB kit contains two 16GB DDR5 5600 UDIMMs built for the ASRock Rack W680D4U-2L2T/G5 motherboard. It targets system integrators and IT staff who need a validated memory upgrade for that specific platform. The modules run at 1.1V with CL46 timing and use a 1Rx8 organisation.
Tool-free DIMM installation
Installation follows the standard UDIMM procedure: open the socket latches, align the single notch on the 288-pin module, press firmly until the latches click shut. Common issues are partial seating that prevents POST and mixing these non-ECC unbuffered sticks with registered or ECC modules, which the board will not accept.
Verify board model and slot population rules
Confirm the exact motherboard model is W680D4U-2L2T/G5, as other W680 variants may have different memory qualification lists. Check the manual for the approved slot population order and maximum supported capacity per channel so the two-module kit is installed in the correct sockets.
Highlights
- 32 GB total capacity from two 16 GB modules
- DDR5 5600 speed with PC5-44800 bandwidth rating
- Low 1.10 V operation reduces power draw
- CL46 CAS latency for responsive timing
- Validated for ASRock Rack W680D4U-2L2T/G5 motherboard
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Questions about this item
How can I confirm the DDR5 5600 CL46 kit is running at its rated speed after installation?
Enter the system BIOS or UEFI and verify the memory frequency shows 5600 MT/s with CAS latency 46; CPU-Z or similar tools will also report DDR5-5600 and CL46 timings.
What does the package contain and is anything else required to use it?
The box includes two 16 GB 288-pin DDR5 UDIMM modules for a total of 32 GB; no additional parts are needed — just install them into the compatible motherboard slots.
Which capacity option should I choose for the ASRock Rack W680D4U-2L2T/G5?
This kit provides 32 GB as a matched 2 x 16 GB pair, which is the only capacity offered for this specific part number.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



