We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 SODIMM modules in anti-static packaging

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 4800 CL40 SODIMM SuperMicro X13SAV-PS memory upgrade

SKU CH-EH3X-B1CT0

A 32 GB DDR5 SODIMM kit running at 4800 MT/s with CL40 latency, built for the SuperMicro X13SAV-PS motherboard

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB total capacity with two 16 GB modules
  • DDR5 4800 MT/s speed for responsive system performance
  • CL40 CAS latency at 1.1 V operating voltage
  • 262-pin SODIMM form factor fits SuperMicro X13SAV-PS
  • Non-ECC unbuffered design using major OEM chips

Compatible DDR5 SODIMM kit for SuperMicro X13SAV-PS

This 32 GB kit contains two 16 GB DDR5 modules built for the SuperMicro X13SAV-PS Mini-ITX embedded motherboard. Each stick is a 262-pin unbuffered SODIMM with a 1Rx8 layout. The kit targets system integrators and embedded developers who need a validated memory upgrade for that specific platform.

Standard voltage and unbuffered design

Modules run at the JEDEC standard 1.1 V, keeping power draw low in typical embedded workloads. The absence of a heat spreader and the unbuffered architecture suit fanless or space-constrained chassis where airflow is limited. CAS latency is CL40 at the rated 4800 MT/s speed.

Sustained load behaviour without ECC

Under continuous operation the memory maintains its rated frequency and timings without error correction. The single-rank organisation helps keep signal integrity stable during long compute sessions. Buyers who need ECC protection or registered DIMMs for multi-socket servers should look elsewhere.

Highlights

  • 32 GB total capacity with two 16 GB modules
  • DDR5 4800 MT/s speed for responsive system performance
  • CL40 CAS latency at 1.1 V operating voltage
  • 262-pin SODIMM form factor fits SuperMicro X13SAV-PS
  • Non-ECC unbuffered design using major OEM chips

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered SODIMM Memory
Part NumberMS38400-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2 x 16GB) DDR5 4800MHz PC5-38400 1Rx8 1.1V 262-PIN Non-ECC SODIMM KIT

Questions about this item

How do I install the 262-pin SODIMM modules in the SuperMicro X13SAV-PS, and what step is often missed?

Power off and unplug the board, open the SODIMM slots, insert each 1Rx8 module at the correct angle until the side clips click, then verify in BIOS that both 16 GB sticks are detected at 4800 MT/s.

What maintenance or replacement will this DDR5 kit need over time?

No scheduled maintenance is required; the modules have no heat spreader and run at 1.1 V, so only replace them if a memory test reports errors or you need more than 32 GB total capacity.

What limit appears first when the memory runs under sustained load?

The CL40 latency at 4800 MT/s is the fixed timing ceiling; bandwidth and latency cannot exceed the JEDEC DDR5-4800 specification built into these 1Rx8 SODIMMs.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.