We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black chips, no metal cover, 262 gold pins at the bottom edge

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 4800 CL40 1.1V 262-PIN SODIMM memory upgrade for ASRock IMB-1244-WV

SKU CH-EE1W-BQZC9

32 GB dual-channel DDR5 SODIMM kit running at 4800 MT/s with CL40 latency and 1.1 V operation for the ASRock IMB-1244-WV board

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB kit expands system memory capacity
  • Dual 16 GB modules enable dual-channel operation
  • DDR5 4800 speed transfers data at PC5-38400 rate
  • Low 1.10 V voltage reduces power draw
  • 262-pin SODIMM form factor fits ASRock IMB-1244-WV motherboard

NEMIX RAM 32GB DDR5 SODIMM kit

This 32 GB kit contains two 16 GB DDR5 SODIMM modules rated at 4800 MT/s with CL40 latency. It is built for the ASRock IMB-1244-WV Mini-ITX motherboard and suits integrators or technicians upgrading that specific platform. The unbuffered non-ECC design matches the board's standard memory requirements.

Thermals noise and power draw

Each module operates at the standard DDR5 voltage of 1.10 V without a heat spreader. Power consumption scales with the 4800 MT/s data rate and the 1Rx8 organisation. The bare PCB runs silently because no active or passive cooling is attached.

What the bundle changes

The package delivers two matched 16 GB sticks in a single kit so dual-channel mode is populated immediately. No additional software, drivers or accessories are included beyond the memory modules themselves. Installation follows the motherboard manual without extra steps.

Highlights

  • 32 GB kit expands system memory capacity
  • Dual 16 GB modules enable dual-channel operation
  • DDR5 4800 speed transfers data at PC5-38400 rate
  • Low 1.10 V voltage reduces power draw
  • 262-pin SODIMM form factor fits ASRock IMB-1244-WV motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered SODIMM Memory
Part NumberMS38400-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemASRock
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2 x 16GB) DDR5 4800MHz PC5-38400 1Rx8 1.1V 262-PIN Non-ECC SODIMM KIT

Questions about this item

How do I install the 262-pin DDR5 SODIMM modules into the ASRock IMB-1244-WV, and what step is often done incorrectly?

Align the notch on each module with the slot key, insert at an angle, then press down firmly until both side clips click; the step people miss is pressing evenly on both ends so the module seats fully.

What maintenance or replacement will this 32GB DDR5 4800 CL40 kit need over time?

No routine maintenance is required; the modules have no heat spreader and run at 1.1V, so replacement is only necessary if a module fails or capacity needs increase.

What limit appears first when this 1Rx8 DDR5 memory runs sustained workloads on the IMB-1244-WV?

The CL40 latency at 4800 MT/s sets the bandwidth ceiling; sustained loads will hit that timing limit before voltage or thermal constraints become a factor.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.