We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 SODIMM modules, 262 pins, no heat spreader, 32 GB kit

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 4800 CL40 1.1V 262-PIN SODIMM for ASRock IMB-X1240-WV memory upgrade

SKU CH-P2GA-80RN8

DDR5 SODIMM kit adds 32 GB across two 16 GB modules running at 4800 MHz CL40 for the ASRock IMB-X1240-WV Mini-ITX board

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB kit expands system capacity for demanding workloads
  • DDR5 4800 speed delivers high data throughput
  • CL40 latency supports responsive multitasking
  • 1 V operation reduces power draw
  • 262-pin SODIMM fits ASRock IMB-X1240-WV motherboard

32GB DDR5 SODIMM kit for ASRock IMB-X1240-WV

This 32GB kit contains two 16GB DDR5 4800 CL40 SODIMM modules built for the ASRock Industrial IMB-X1240-WV Mini-ITX motherboard. The 262-pin unbuffered non-ECC design runs at 1.1V and targets embedded or industrial systems that require a matched pair of low-voltage DDR5 memory.

Matched 1Rx8 pair removes single-channel bottleneck

The kit supplies two identical 1Rx8 modules so the board can operate in dual-channel mode, doubling theoretical bandwidth compared with a single stick. Major OEM Samsung, Micron or Hynix chips provide the DRAM, and the CL40 timing at PC5-38400 speed is the only specification validated for this platform.

Standard SODIMM slot installation

Each module inserts vertically into the board's 262-pin DDR5 SODIMM sockets and locks with the side latches; no heat spreader means the modules fit tight clearance areas. The most common issue is seating the module fully before applying latch pressure — an incomplete insert causes a no-post condition. Always power down and disconnect the supply before handling.

Highlights

  • 32 GB kit expands system capacity for demanding workloads
  • DDR5 4800 speed delivers high data throughput
  • CL40 latency supports responsive multitasking
  • 1 V operation reduces power draw
  • 262-pin SODIMM fits ASRock IMB-X1240-WV motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered SODIMM Memory
Part NumberMS38400-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemASRock
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2 x 16GB) DDR5 4800MHz PC5-38400 1Rx8 1.1V 262-PIN Non-ECC SODIMM KIT

Questions about this item

Will the 1Rx8 DDR5 SODIMM chips need replacement during the system's lifespan?

The modules are built with major OEM Samsung, Micron or Hynix chips and carry a lifetime replacement warranty from the manufacturer.

What sustained-use limit appears first on this CL40 4800 MT/s kit?

The CAS latency of CL40 and the 4800 MT/s data rate set the timing and bandwidth ceiling under continuous load.

How much heat and power does the 1.1 V kit generate when running all day?

Operating at 1.1 V without a heat spreader keeps power draw and thermal output low for constant operation in the Mini-ITX board.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.