NEMIX RAM
NEMIX RAM 32GB (2×16GB) DDR4 3200 CL22 260-pin SODIMM kit for QNAP TVS-H674T TVS-H874T memory upgrade
32 GB DDR4 3200 CL22 SODIMM kit (2 × 16 GB) for QNAP TVS-H674T and TVS-H874T NAS upgrades
- Capacity32GB (2 x 16GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB dual-channel kit doubles NAS memory capacity
- DDR4 3200 CL22 timing matches QNAP TVS-H674T and TVS-H874T specs
- 20 V low-voltage modules reduce power draw and heat
- 260-pin SODIMM form factor fits NAS memory slots directly
- Major-brand Samsung Micron Hynix chips ensure enterprise-grade reliability
QNAP TVS-H674T & TVS-H874T memory kit
This NEMIX RAM kit supplies 32 GB of DDR4 3200 memory in two 16 GB SODIMM modules. It is built for QNAP TVS-H674T and TVS-H874T NAS units that accept 260-pin unbuffered non-ECC memory. The kit suits administrators who need to expand system memory for heavier workloads or virtualisation tasks.
DDR4 3200 SODIMM limits
The modules run at 3200 MT/s with CL22 latency at 1.20 V. The DDR4 SODIMM standard caps transfer rates at this speed and voltage, so the kit cannot exceed the platform's maximum supported frequency. Systems that require ECC or registered DIMMs will not accept these unbuffered non-ECC modules.
2Rx8 dual-rank configuration
Each 16 GB module uses a 2Rx8 organisation, which determines how the memory controller addresses the chips. This rank structure must match the NAS motherboard's supported population rules for the upgrade to function correctly.
Highlights
- 32 GB dual-channel kit doubles NAS memory capacity
- DDR4 3200 CL22 timing matches QNAP TVS-H674T and TVS-H874T specs
- 20 V low-voltage modules reduce power draw and heat
- 260-pin SODIMM form factor fits NAS memory slots directly
- Major-brand Samsung Micron Hynix chips ensure enterprise-grade reliability
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | QNAP NAS Compatible Series Memory |
| Model | QNAP DDR4 3200MHZ Non-ECC Unbuffered SODIMM NAS Memory |
| Part Number | MS25600-628K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Qnap |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT |
Questions about this item
Should I choose the 32GB kit or buy two 16GB modules separately?
The kit already contains two matched 16GB modules tested together for the QNAP TVS-H674T and TVS-H874T, so a single purchase guarantees dual-channel operation.
What does the 3200MHz rating mean once the memory is installed in my NAS?
The modules run at DDR4 3200 (PC4-25600) with CL22 latency at 1.20V, delivering the rated bandwidth as long as the NAS firmware enables the XMP or JEDEC profile.
Does the 260-pin SODIMM interface limit the speed or capacity I can use?
The 260-pin DDR4 SODIMM form factor is the standard for these QNAP models; it supports the full 3200MHz speed and 32GB total capacity without any adapter or down-clocking.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



